Dicas Reparação
Modelo - Chassis
Pesquisa: Enviar Dica Resolvida
Resultados 81460
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | KV32XBR10 | VERTICAL PROBLEMS, RESOLDERED C-504 | I have now seen several models, ANU-1 chassis that exhibitwhat looks to be an odd type of retrace at the bottom of the screen.There may also be a few lines missing in the middle of the screen. It isunlike vertical problems I have seen in the past. The | ||
| Sony | KV27XBR65 | VERTICAL LINES ON BOTTOM OF SCREEN, REPLACED C-504 | I have now seen several models, ANU-1 chassis that exhibitwhat looks to be an odd type of retrace at the bottom of the screen.There may also be a few lines missing in the middle of the screen. It isunlike vertical problems I have seen in the past. The | ||
| Sony | KV27XBR15 | VERTICAL PROBLEMS, RESOLDERED C-504 (IC-500/PIN 5) | I have now seen several models, ANU-1 chassis that exhibitwhat looks to be an odd type of retrace at the bottom of the screen.There may also be a few lines missing in the middle of the screen. It isunlike vertical problems I have seen in the past. The | ||
| Sony | KV32XBR65 | VERTICAL PROBLEMS, REPLACED C-504 | I have now seen several models, ANU-1 chassis that exhibitwhat looks to be an odd type of retrace at the bottom of the screen.There may also be a few lines missing in the middle of the screen. It isunlike vertical problems I have seen in the past. The | ||
| Sony | FH110WX | REFERENCE NUMBER CORRECTION - GEAR (B) CAM | On page TC-29 of the S/M, there are two parts shown that arereferenced as number 163. One is the Flywheel and the other is Gear (B)Cam. | ||
| Sony | D9 | UNIT WILL WORK WITH BATTERY BUT WILL NOT WORK W/AC ADAPTOR | Unit will work with battery, but will not work with ACadaptor. | ||
| Sony | GEN-CAM | PART NUMBER FOR POWER CORD | What is the part number for the cord which connects AC poweradaptor to the camcorder? -HQ COMMENTS: The part number for the cord which connects an AC poweradaptor to the camcorder is 1-559-354-21. | ||
| Sony | ST72TV | PICTURE DRIFT | Drifting, fading, flashing and cutting out of picture/sound. | ||
| Sony | KV3000R | PART NUMBER CORRECTION: R-903 | Found error in the service manual on page 68: Incorrectentry: No. 262 part number 1-205-601-00 res, wirewound 10 Ohm/20W (R-903).Correct entry: No. 262 part number 1-205-526-00 res, wirewound 220 Ohm/40W(R-903). The part list entry for R-903 (page 97) | ||
| Sony | SL2005 | SOMETIMES CASSETTE COMPARTMENT WILL NOT STAY CLOSED | Reference number - item No. 372 on page 4-8 of SL-2000 servicemanual becomes intermittent in operation and adjustment of position doesnot solve the problem. | ||
| Sony | SL70HF | IC-599 PART NUMBER CORRECTION | Correct part number per semiconductor replacement handbookis 8-759-910-84. -HQ COMMENTS: The correct part number is 8-759-910-84. A servicebulletin will be issued. | ||
| Sony | SLV50 | IC-599 PART NUMBER CORRECTION | Correct part number per semiconductor replacement handhook is8-759-910-84. -HQ COMMENTS: The correct part number is 8-759-910-84. See servicebulletin number VID0117. | ||
| Sony | CCDV5 | PART NUMBER ERROR, LENS BLOCK REPAIR GUIDE | The correct part number for the AF Section Assembly shown onpage 3, of the Lens Block Repair Guide (VCL-1206YH,YK) is 3-707-539-01. -HQ COMMENTS: The correct part number is 3-707-539-01. See servicebulletin CAM0097. | ||
| Sony | SPP150 | NO CODE SENT TO HANDSET FROM BASE | Power light on Base continues to flash when Handset placed onBase. Handset is ok. Determined that code comes out of IC-501 pins 45 &46 then transmitted from Base to Handset over the air - not through topcharge terminals. When Handset placed on Base, c | ||
| Sony | KV32XBR15 | VERTICAL RETRACE LINES, RE-SOLDERED C-504 ("A" BOARD) | I have now seen several models, ANU-1 chassis that exhibitwhat looks to be an odd type of retrace at the bottom of the screen.There may also be a few lines missing in the middle of the screen. It isunlike vertical problems I have seen in the past. The |