Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | KPR53XBR15 | G BOARD AND A BOARD HAS +135 PRINTED ON BOARDSWRONG | Connector G2 (G board) and connector A2 (A Board) have +135printed on them. This is incorrect the true voltage is +115v DC. The-135 volt line is correct. | ||
Sony | KPR46XBR15 | G BOARD AND A BOARD HAS +135 PRINTED ON BOARDSWRONG | Connector G2 (G board) and connector A2 (A Board) have +135printed on them. This is incorrect the true voltage is +115v DC. The-135 volt line is correct. | ||
Sony | KPR41EXR95 | G BOARD AND A BOARD HAS +135 PRINTED ON BOARDSWRONG | Connector G2 (G board) and connector A2 (A Board) have +135printed on them. This is incorrect the true voltage is +115v DC. The-135 volt line is correct. | ||
Sony | KP61XBR28 | G BOARD AND A BOARD HAS +135 PRINTED ON BOARDSWRONG | Connector G2 (G board) and connector A2 (A Board) have +135printed on them. This is incorrect the true voltage is +115v DC. The-135 volt line is correct. | ||
Sony | KP61V15 | G BOARD AND A BOARD HAS +135 PRINTED ON BOARDSWRONG | Connector G2 (G board) and connector A2 (A Board) have +135printed on them. This is incorrect the true voltage is +115v DC. The-135 volt line is correct. | ||
Sony | KP53XBR45 | BLUE AND GREEN TOO BRIGHT, SERBICE BULLETIN TVP0821R2 | Blue and green CRTs had excessive brightness, screen controls adjustment did not reduce it. This unit already had the circuit improvement as per bulletin TVP0281R1, except it had the old version ICs TDA6101Q. | ||
Sony | KP53XBR25 | G BOARD AND A BOARD HAS +135 PRINTED ON BOARDSWRONG | Connector G2 (G board) and connector A2 (A Board) have +135printed on them. This is incorrect the true voltage is +115v DC. The-135 volt line is correct. | ||
Sony | KP53V16 | G BOARD AND A BOARD HAS +135 PRINTED ON BOARDSWRONG | Connector G2 (G board) and connector A2 (A Board) have +135printed on them. This is incorrect the true voltage is +115v DC. The-135 volt line is correct. | ||
Sony | KP53V15 | G BOARD AND A BOARD HAS +135 PRINTED ON BOARDSWRONG | Connector G2 (G board) and connector A2 (A Board) have +135printed on them. This is incorrect the true voltage is +115v DC. The-135 volt line is correct. | ||
Sony | KP53V15 | INTERMITTENT NOISE WHEN CHANGING CHANNELS, TUNER PROBLEM | Customer reported arcing noise occasionally when he wouldchange channesl. Found during channel change tuning system wasn't lockingon station immediately and static noise was generated through speakers.Until tuner would lock on station, this symptom was | ||
Sony | KP53S15 | RUBBER CAP AS PER I/M PART NUMBER4-050-330-01 | Instruction Manual shows rubber caps as a accessorie, butdoes not give a part number. Nor, does this part appear in the ServiceManual. -HQ COMMENTS: The part number for these caps are 4-050-330-02. | ||
Sony | KP46XBR25 | G BOARD AND A BOARD HAS +135 PRINTED ON BOARDSWRONG | Connector G2 (G board) and connector A2 (A Board) have +135printed on them. This is incorrect the true voltage is +115v DC. The-135 volt line is correct. | ||
Sony | KP46V16 | G BOARD AND A BOARD HAS +135 PRINTED ON BOARDSWRONG | Connector G2 (G board) and connector A2 (A Board) have +135printed on them. This is incorrect the true voltage is +115v DC. The-135 volt line is correct. | ||
Sony | KP46V15 | G BOARD AND A BOARD HAS +135 PRINTED ON BOARDSWRONG | Connector G2 (G board) and connector A2 (A Board) have +135printed on them. This is incorrect the true voltage is +115v DC. The-135 volt line is correct. | ||
Sony | KP46S15 | RUBBER CAP AS PER I/M PART NUMBER4-050-330-01 | Instruction Manual shows rubber caps as a accessorie, butdoes not give a part number. Nor, does this part appear in the ServiceManual. -HQ COMMENTS: The part number for these caps are 4-050-330-02. |