Dicas Reparação
Modelo - Chassis KP53V16
Pesquisa: KP53V16 Enviar Dica Resolvida
Resultados 4
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | KP53V16 | G BOARD AND A BOARD HAS +135 PRINTED ON BOARDSWRONG | Connector G2 (G board) and connector A2 (A Board) have +135printed on them. This is incorrect the true voltage is +115v DC. The-135 volt line is correct. | ||
| Sony | KP53V16 | GLASS DOOR HINGES AND SCREWS, PART NUMER NEEDED | Glass door hinges or mounting screws are not availableseparately. Glass block assembly must be ordered, part numberX-403-295-21, which includes all of the above. | ||
| Sony | KP53V16 | "D" AND "DS" BOARD CHANGED, REFER TO THE KP-46S55 S/M | The Service Manual shows the DS Board has three IC mountedon it. The one in the unit only has one IC. -HQ COMMENTS: Both the D and DS boards have been changed. Theyare not interchangeable. Please refer to the KP-46S55 for the correctschematic, page | ||
| Sony | KP53V16 | MECHANICAL SEALED TUBE USED, THEY CAN NOT BE INTERCHANGED | What type of CRT were used in this chassis? -HQ COMMENTS: This model only used the Mechanical sealed type CRT's.They can not be replaced with the Silicon type. Please refer to theService Bulletin that has been releasd. |