Dicas Reparação
Modelo - Chassis KP61XBR28
Pesquisa: KP61XBR28 Enviar Dica Resolvida
Resultados 3
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | KP61XBR28 | G BOARD AND A BOARD HAS +135 PRINTED ON BOARDSWRONG | Connector G2 (G board) and connector A2 (A Board) have +135printed on them. This is incorrect the true voltage is +115v DC. The-135 volt line is correct. | ||
| Sony | KP61XBR28 | ANODE LEAD ASSEMBLY, NOT SOLD SEPARTELY | Service Manual lists the Anode lead Ref 128 as P/N1-559-865-41. It is not available. -HQ COMMENTS: This lead comes with the CRT. It was mistakenlylisted in the part list. It is not available as a separate part. This was covered in Correcti | ||
| Sony | KP61XBR28 | MECHANICAL SEALED TUBE USED, CAN NOT BE INTERCHANGED | What type of CRT were used in this chassis? -HQ COMMENTS: This model only used the Mechanical sealed type CRT's.They can not be replaced with the Silicon type. Please refer to theService Bulletin that has been releasd. |