Dicas Reparação
Modelo - Chassis
Pesquisa: Enviar Dica Resolvida
Resultados 81407
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | KV27HSR10 | HORIZONTAL LINES IN PICTURE, C-546 COLD SOLDERED ("A" BOARD) | Horizontal lines in picture sometimes on top sometimeson the bottom. Looks like retrace but in reality it is ringing. | ||
| Sony | KV27EXR15 | HORIZONTAL LINES IN PICTURE, RESOLDER C-546 | Horizontal lines in picture sometimes on top sometimeson the bottom. Looks like retrace but in reality it is ringing. | ||
| Sony | KV32XBR70 | HORIZONTAL LINES IN PICTURE, SOLDERED C-546 | Horizontal lines in picture sometimes on top sometimeson the bottom. Looks like retrace but in reality it is ringing. | ||
| Sony | KV32XBR65 | HORIZONTAL LINES IN PICTURE, REPLACED C-546 | Horizontal lines in picture sometimes on top sometimeson the bottom. Looks like retrace but in reality it is ringing. | ||
| Sony | KV32XBR15 | HORIZONTAL LINES IN PICTURE, RE-SOLDERED C-546 | Horizontal lines in picture sometimes on top sometimeson the bottom. Looks like retrace but in reality it is ringing. | ||
| Sony | KV27XBR65 | HORIZONTAL LINES IN PICTURE, REPLACED C-546 (IC-500/PIN 5) | Horizontal lines in picture sometimes on top sometimeson the bottom. Looks like retrace but in reality it is ringing. | ||
| Sony | KV27XBR60 | HORIZONTAL LINES IN PICTURE | Horizontal lines in picture sometimes on top sometimeson the bottom. Looks like retrace but in reality it is ringing. | ||
| Sony | KV27XBR15 | HORIZONTAL LINES IN PICTURE, RESOLDERED C-546 ("A" BOARD) | Horizontal lines in picture sometimes on top sometimeson the bottom. Looks like retrace but in reality it is ringing. | ||
| Sony | KV27XBR10 | HORIZONTAL LINES IN PICTURE, COLD SOLDERED C-546 ("A" BOARD) | Horizontal lines in picture sometimes on top sometimeson the bottom. Looks like retrace but in reality it is ringing. | ||
| Sony | KV32XBR65 | SET ALWAYS IN CHANNEL SCAN MODE, REPLACED CP110 | Servicer ran a call on unit at dealer, set was defectiveout-of-box. Set would intermittently go into channel scan. If anycustomer control button was depressed, unit would stop scanning, butwould not perform function related to button which was depresse | ||
| Sony | KV27EXR10 | VERTICAL LINES IN PICTURE, RESOLDER C-546 | Vertical lines in picture sometimes on top sometimes on thebottom. Looks like retrace but in reality it is ringing. | ||
| Sony | KV1997R | COULD NOT TURN ON UNIT MANUALLY, REPLACE R-617 | Remote ON/OFF works fine. Could not turn on unit manually,It took two pushes of power button to turn on unit. R-609 providesnegative supply when set is turned on. Once set is off, R-617 shouldsupply the negative voltage. Negative voltage was not pres | ||
| Sony | CCDF45 | MECHANISM CHASSIS | Guide sticking when unloading process begins. Apparently,chassis is different - substitute part number is X-3749-038-1. -HQ COMMENTS: Please refer to Service Bulletin CSV-3 189 | ||
| Sony | SSU310 | INCORRECT PART NUMBER - WIRE KIT | The above part number probably should be T-9690-012-A. Butneither part number is in the system. The part number for C-1, 3.9uF/50V,capacitor is 1-123-574-11. What is part number for L1, .27uH coil? -HQ COMMENTS: L1 and C1 are part of wire kit and mus | ||
| Sony | CDP590 | EF BALANCE ADJUSTMENT | Service manual shows EF balance and adjustment procedure, butdoes not give adjustment pot etc. Laser PU is preadjusted at factory andis not field adjustable. Service manual is in error. |