O led deve piscar fazer uma pausa e piscar novamente, o número de vezes que pisca define o número de erro. Aqui fica a lista de erros
10 Used to display child lock mode
11 Used to display timer mode
12 Audio MSP341X doesn't answer anymore
13 The tuner doesn't answer anymore
14 TDA9330 (HOP) doesn't answer anymore or +8V not available
15 FI tuner doesn't answer anymore
16 VSP 9402 (IU100) doesn't answer anymore
17 I2C Bus_1 data line held low
18 I2C Bus_1 clock line held low
20 Bus access is prohibited for SW
21 I2C Bus_2 data line held low
23 I2C Bus 2 clock line held low
25 Switched 5V not available
26 Tube gets not warm in time (Icut signal no correct)
27 Deflection problem. Deflection detects >3 times prot.
31 Keyboard decoder problem (SW pointer problem)
32 Keyboard decoder problem (A SW- timer has been request
but isn't available yet)
34 The NVM chip doesn't answer anymore
35 The voltage +5V not available
36 Wrong address passed to the bus-handler
37 Unexpected level on NMI line found
38 There is no RAM for the requested operation
42 The POR bit of the Primus can't be reset
43 Power down detection TDA9330 (HOP)
44 NRF bit problem. TDA9330 (HOP) oscillator not locked
45 FLS bit problem on safety circuits of TDA9330 (HOP)
46 NHF bit problem (horizontal flyback) on the PHI2_REF
of TDA9330 (HOP)
47 NDF bit problem on the vertical part of TDA9330 (HOP)
Se pisca 4 vezes, tem de ter uma pausa pelo meio, pode ser o 13 ou 31.