Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | CCDF33 | NO DRUM ROTATION | Drum would not spin so unit would not load. Pin 66 of IC-501did output a signal but when tracing the signal it did not appear atpin 14 of IC-510. | ||
Sony | PCM501 | S/N SPECIFICATION NOT GIVEN | What is the signal to noise specification of this unit? Thisunit is mostly used now by recording studios who send the units in withcomplaint of noise. From my experience repairing other PCM units the501 is more noisy than the 701 or 601. Since there i | ||
Sony | CCDV99 | PART NUMBERS FOR FLEX CONNECTORS | I need the part numbers for the following flex connectors:FP160, FP162, FP203. | ||
Sony | WMD6C | NO RECORD OR PLAYBACK | Found signal going into IC-101 and 102 (dolby ICs), but notgoing out. No DC voltages except pin 21 (B+). | ||
Sony | CDX7580 | ERROR MESSAGE E04 COMES UP | Error message E04 comes up even on discs that will play ok onother brands of CD players (automotive). Confirmed symptoms but have notyet located problem. Any others indicating same/similar problem? -HQ COMMENTS: This situation is mainly due to some di | ||
Sony | CDX7540 | ERROR MESSAGE E04 COMES UP | Three units with the same problem. Error message E04 comes upeven on discs that will play ok on other brands of CD players(automotive). Confirmed symptoms but have not yet located problem. Justseems unusual one dealer would have three units with the s | ||
Sony | CDXR77 | MALFUNCTION OF POWER ANTENNA | Car stereo service bulletin number, CAR0149 does not work.The emitter of Q-406 when installed will be connected to the emitter ofQ-419. This will destroy Q-406 when power is turned on. | ||
Sony | ESR11 | CLOCK DISPLAY ON ESR-11 | ESR-11 car stereo with 11 pin power cord connector shows a dimclock display with unit turned off. This display is not noticed on theES-R11 with the 9 pin power cord connector. | ||
Sony | SPP90 | INTERMITTENT DIAL TONE | Tone dial intermittent or not working at all. Also appliesto serial numbers 59849 and 62172. | ||
Sony | KV32XBR10 | SHUTDOWN - INTERMITTENTLY, RESOLDERED T-501 (HDT) | Set would shutdown intermittently. Servicer found primaryside of T-501 not soldered properly. | ||
Sony | KV27XBR10 | SHUTDOWN - INTERMITTENTLY, COLD SOLDER T-501 | Set would shutdown intermittently. Servicer found primaryside of T-501 not soldered properly. | ||
Sony | TAE1000ESD | HUM WHEN USING SUBWOOFER AND CENTER CHANNEL OUTPUTS | 60 Hz hum heard at subwoofer speaker, when subwoofer amplifieris turned on to max volume out. | ||
Sony | KV27EXR10 | LOW VOLUME ON VARIABLE AUDIO OUT, NORMAL | We have had several complaints that the volume is too low onthe variable audio output. Do you have any official suggestions beforewe fix this problem? -HQ COMMENTS: This is not defective of the unit. It is just a designsetting. Customer can control a | ||
Sony | SPP320 | INTERMITTENT HANDSHAKE AND STATIC ON AUDIO | Phone would intermittently not lock up, and when it did, therewas static. When handset was taken apart, phone worked. Phone workedbecause antenna was not connected. | ||
Sony | STRAV47 | NO AUDIO OUTPUT-IC501 | Inputs and outputs can be selected but you do not have anyoutput from IC-501, pins 18 and 25. All voltages on IC-501 are goodand have inputs to pin 20, 21 and 22. IC-501 has been changed. -HQ COMMENTS: I suggest that your problem is caused by either a |