Dicas Reparação
Modelo - Chassis CCDF33
Pesquisa: CCDF33 Enviar Dica Resolvida
Resultados 20
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CCDF33 | NO CAMERA VIDEO, ALL BURST, NO RM95 DATA | Unit looked like all data was 00 or FF for camera section.Clock 4Mhz to IC601 was intermittent. As power supply was turned upslowly, clock X601 would stop. RM95 had line only. The DDS processorIC651 on CK43 board was not working. IC651, Pins 1-4 CM0, | ||
| Sony | CCDF33 | WEAK PICTURE IN CAMERA MODE- 6CV651 | Faint noisy picture in camera mode. CV-651 measured 40pF -HQ COMMENTS: CV-651 is the clock adjustment trimmer for the DDS CPUIC-651. | ||
| Sony | CCDF33 | NO PLAYBACK | Unit would Record but not Playback. If I disconnected pin 16of IC-201 on the CV-8 board (horizontal blanking from IC-502 forcharacter insert), normal video and sync and separate composite syncsignal not locked to the video appeared on the Scope. In Playb | ||
| Sony | CCDF33 | MECHANICAL JAMMING | When tape inserted, unit would thread but no functions wereoperational and would have to power down in order to eject tape. | ||
| Sony | CCDF33 | PART NUMBER FOR REC PROOF SWITCH TAPE SELECT | There is no part number listed for the REC proof switch onthis model. What is the part number? | ||
| Sony | CCDF33 | IRIS OPENS AND CLOSES FAST | Iris would open and close fast (chatter) with lens cap removedand camera turned on. | ||
| Sony | CCDF33 | INCOMPLETE "F" RING ASSEMBLY | Servicer ordered replacement front lens assembly because lenswas broken. Part received was ring without lens. The price we sell thepart suggests that the lens is included. The drawing in the service man-ual also indicates the lens is included. Please | ||
| Sony | CCDF33 | OWNERS' MANUAL | On page 21 of the owners' manual it states that the squaremanual focus symbol will blink when the autofocus function does not workproperly due to low light level or low contrast. This is incorrect thesymbol does not blink. Customer had camera in at Bur | ||
| Sony | CCDF33 | CHARACTER GENERATOR NOT WORKING | Character generator not working. Found IC-501 defective. Re-placing IC-501 restored video in data mode but no on-screen display.Found lack of OSD caused by no solder on pin 4 of CN-802. | ||
| Sony | CCDF33 | NO POWER | No power at all. All functions do not work. IC-501 gets EVER5V (Vpp and Vss) but does not turn on DC to DC. Found X-501 with nooscillation. | ||
| Sony | CCDF33 | NO PLAYBACK PICTURE | No Playback picture. Q-224 (soft limiter) is not turning ondue to low dc bias. | ||
| Sony | CCDF33 | NO VIDEO | No output video. | ||
| Sony | CCDF33 | NO CAMERA VIDEO AFTER 15 SECONDS | No camera video after 15 seconds. The iris would close after15 seconds and would not re-open. | ||
| Sony | CCDF33 | PART NUMBER FOR AUTOFOCUS MOTOR AND IRIS MOTOR | Servicer called and requested availability and part number forautofocus motor. Part number and reference is not listed in servicemanual. Is this part going to be available separately? -HQ COMMENTS: The part number of the focus motor is 3-707-561-01. | ||
| Sony | CCDF33 | NO VIDEO OUT - CAMERA MODE | Iris closed, no output from drive IC807. When pin 6 ofIC-807 was taken low, the iris opened.Proper operation of the Iris detect circuit was verified by biasing ONQ-644, Q-611 and Q-609. However, Q-609 collector stayed at 4.8 V.Found R-626 at the emitte |