Dicas Reparação




Modelo - Chassis

AIWA
AOC
BEKO
CCE
CINERAL
DAEWOO
GRADIENTE
GRUNDIG
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
SAMSUNG
SANYO
SHARP
SONY
TCL
THOMSON
TOSHIBA
VESTEL

Pesquisa: Enviar Dica Resolvida
Resultados 81401
Pedir dica reparação
MarcaModelo
(Chassis)		SintomaCausaSoluçãoPor:
SonyCDP397
WON'T LOAD THE DISK INTERMITTENTLY Unit will not load the disk.
SonyCFD765
WIRE HARNESS PART NUMBER NOT SHOWN IN SERVICE MANUAL Servicer needs the part number for the two cables from theoptical assembly to connectors CN-701 and CN-702. Unit seems to haveproblem similar to CFD-454 and service bulletin No. AUD0174R1 but servicersays the listed cables won't work. -HQ COMMENTS: We
SonyCFD755
WIRE HARNESS PART NUMBER NOT SHOWN IN SERVICE MANUAL Servicer needs the part number for the two cables from theoptical assembly to connectors CN-701 and CN-702. Unit seems to haveproblem similar to CFD-454 and service bulletin No. AUD0174R1 but servicersays the listed cables won't work. -HQ COMMENTS: We
SonyKPR46CX50
PART NUMBER IF BLOCK "B" BOARD, 1-464-598-11 Part number missing from part list under B board for the IFblock. -HQ COMMENTS: The part number is 1-464-598-11.
SonyCFD750
WIRE HARNESS PART NUMBER NOT SHOWN IN SERVICE MANUAL Servicer needs the part number for the two cables from theoptical assembly to connectors CN-701 and CN-702. Unit seems to haveproblem similar to CFD-454 and service bulletin No. AUD0174R1 but servicersays the listed cables won't work. -HQ COMMENTS: We
SonyCDPC69ES
DIM DISPLAY The display was very dim.
SonyCDPC315
DIM DISPLAY The display was very dim.
SonyCDPC215
DIM DISPLAY The display was very dim.
SonyCDPC211
DIM DISPLAY The display was very dim.
SonyCDPC325
DIM DISPLAY The display was very dim.
SonyCDPC225
DIM DISPLAY The display was very dim.
SonyCDPC322M
DIM DISPLAY The display was very dim.
SonyCDPC425
DIM DISPLAY The display was very dim.
SonyCDPC515
DIM DISPLAY The display was very dim.
SonyCDPC625
DIM DISPLAY The display was very dim.


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads