T-CON Board Voltages and Signals
| MP | Description |
|---|
| BOOST | Main Supply Input |
| CKV1, CKV2, CKV3 | Vertical Scan Driver High Voltage Output Signal |
| CKVB1, CKVB2, CKVB3 | Vertical Scan Driver High Voltage Reverse Output Signal |
| CKVCS1, CKVBCS1 | Connect the CKV1 and CKVB1 Signals together |
| CKVCS2, CKVBCS2 | Connect the CKV2 and CKVB2 Signals together |
| CKVCS3, CKVBCS3 | Connect the CKV3 and CKVB3 Signals together |
| COMP | Fault Amplifier Reference Input |
| CPV1 | It Do Set the Timming of CKV1 and CKVB1 Signals |
| CPV2 | It Do Set the Timming of CKV2 and CKVB2 Signals |
| CPV3 | It Do Set the Timming of CKV3 and CKVB3 Signals |
| DISH | It discharges the voltage in supply errors |
| DLY | Initial Delay Adjuster |
| EN | Activates Scan Integration. It works simultaneously with DLY |
| FB | Feedback Input. It has a supply of around 1.24 |
| GOFF | CKV is the - (negative) supply of CKVB and STVP signals |
| VDA Avdd Vdda | 13V and 20V |
| VDD Vlogic Vddd Dvdd | 3.3 |
| VON, VGH, VGON, VDDG | 20V to 30V |
| VOFF, VGL, VGOFF, VEEG | -5V to -7V |
| |
RSS