Dicas Reparação
Modelo - Chassis
Pesquisa: Enviar Dica Resolvida
Resultados 81408
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | KV20TS32 | INTERMITTENT POPPING SOUND, REPLACED TUNER | Dealer stock set would play for 10-15 mins. then develop a popping sound. Noticed picture would flash at same time, tapping tuner would aggravate problem. | ||
| Sony | KV13VM21 | Q1801 DESCRIPTION & PART NUMBER INCORRECT,SEE SB 264 | The description and part number listed on page 145 of theservice manual for Ref. #Q1801, transistor, 2sD1135-C, is incorrect. | ||
| Sony | KV13VM20 | UNIT TURNS OFF AFTER WARM UP, FR1838 | After the set warms up it intermittently shuts off. | ||
| Sony | KV13VM20 | Q1801 DESCRIPTION & PART NUMBER INCORRECT,SEE SB 264 | The description and part number listed on page 145 of theservice manual for Ref. #Q1801, transistor, 2sD1135-C, is incorrect. | ||
| Sony | KPR53XBR15 | G BOARD AND A BOARD HAS +135 PRINTED ON BOARDSWRONG | Connector G2 (G board) and connector A2 (A Board) have +135printed on them. This is incorrect the true voltage is +115v DC. The-135 volt line is correct. | ||
| Sony | KPR46XBR15 | G BOARD AND A BOARD HAS +135 PRINTED ON BOARDSWRONG | Connector G2 (G board) and connector A2 (A Board) have +135printed on them. This is incorrect the true voltage is +115v DC. The-135 volt line is correct. | ||
| Sony | KPR41EXR95 | G BOARD AND A BOARD HAS +135 PRINTED ON BOARDSWRONG | Connector G2 (G board) and connector A2 (A Board) have +135printed on them. This is incorrect the true voltage is +115v DC. The-135 volt line is correct. | ||
| Sony | KP61XBR28 | G BOARD AND A BOARD HAS +135 PRINTED ON BOARDSWRONG | Connector G2 (G board) and connector A2 (A Board) have +135printed on them. This is incorrect the true voltage is +115v DC. The-135 volt line is correct. | ||
| Sony | KP61V15 | G BOARD AND A BOARD HAS +135 PRINTED ON BOARDSWRONG | Connector G2 (G board) and connector A2 (A Board) have +135printed on them. This is incorrect the true voltage is +115v DC. The-135 volt line is correct. | ||
| Sony | KP53XBR45 | BLUE AND GREEN TOO BRIGHT, SERBICE BULLETIN TVP0821R2 | Blue and green CRTs had excessive brightness, screen controls adjustment did not reduce it. This unit already had the circuit improvement as per bulletin TVP0281R1, except it had the old version ICs TDA6101Q. | ||
| Sony | KP53XBR25 | G BOARD AND A BOARD HAS +135 PRINTED ON BOARDSWRONG | Connector G2 (G board) and connector A2 (A Board) have +135printed on them. This is incorrect the true voltage is +115v DC. The-135 volt line is correct. | ||
| Sony | KP53V16 | G BOARD AND A BOARD HAS +135 PRINTED ON BOARDSWRONG | Connector G2 (G board) and connector A2 (A Board) have +135printed on them. This is incorrect the true voltage is +115v DC. The-135 volt line is correct. | ||
| Sony | KP53V15 | G BOARD AND A BOARD HAS +135 PRINTED ON BOARDSWRONG | Connector G2 (G board) and connector A2 (A Board) have +135printed on them. This is incorrect the true voltage is +115v DC. The-135 volt line is correct. | ||
| Sony | KP53V15 | INTERMITTENT NOISE WHEN CHANGING CHANNELS, TUNER PROBLEM | Customer reported arcing noise occasionally when he wouldchange channesl. Found during channel change tuning system wasn't lockingon station immediately and static noise was generated through speakers.Until tuner would lock on station, this symptom was | ||
| Sony | KP53S15 | RUBBER CAP AS PER I/M PART NUMBER4-050-330-01 | Instruction Manual shows rubber caps as a accessorie, butdoes not give a part number. Nor, does this part appear in the ServiceManual. -HQ COMMENTS: The part number for these caps are 4-050-330-02. |