Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | KV2062AEB | INCORRECT IC SUBSTITUTION | Need answer to previous inquiry. CX519-004p 8-759-600-63 substo CX523-117P 8-759-603-67. This is the controller IC. Substitute ICwill not work. Original IC works, but is missing some functions. Sub ICwill not perform any function. When the original | ||
Sony | KV2072ME5 | INCORRECT IC SUBSTITUTION | Need answer to previous inquiry. CX519-004p 8-759-600-63 substo CX523-117P 8-759-603-67. This is the controller IC. Substitute ICwill not work. Original IC works, but is missing some functions. Sub ICwill not perform any function. When the original | ||
Sony | GV8 | BATTERY RELEASE BUTTON PART NUMBER | What is the part number of the battery release button on theGV-8? -HQ COMMENTS: The part number is 3-728-948-11. | ||
Sony | SPP110 | SCANNING NOISE IN BACKGROUND | The SPP-110 is used in a house with other non-cordless phones.When the other phones are used, a scanning (swooshing) noise can be heardin the background. Is this normal? -HQ COMMENTS: Yes, it is normal. It is more likely to be picked up onother cordle | ||
Sony | SPPS10 | UNIT WOULD NOT OPERATE | Base unit was locked up. When AC adaptor was plugged in, unitwould not operate. Found problem in reset circuit. | ||
Sony | STRGX4ES | PROTECT COMES ON INTERMITTENTLY | Unit would go into protect mode intermittently. I found badsolder connection on (Display Board) where C-330 and R-347 are solderedto the board. This is on the protect line to IC-301 pin 36 and providesthe 5V B+ to this pin. Physically, C-330 and R-347 | ||
Sony | S5200S | WARRANTY CARD | I have a customer that purchased a system. The warranty cardstates that he has a two-year parts and labor warranty. However, theTCW255 in the warranty book states that this has a one-year parts andlabor warranty. | ||
Sony | CCDSP7 | PART NUMBER FOR SOFT CASE | I need the part number for the complete soft case that comeswith the CCD-SP7. -HQ COMMENTS: The part number is A-7002-376-A. A service bulletin willbe issued. | ||
Sony | EVS350 | TAPE EJECTS/WHEN THE RECORD BUTTON IS HIT | Tape ejects when you press the Record button. When the cass-ette tape is put in the unit, CN-405 pins 16 and 17 were found to beopen. | ||
Sony | STRAV760 | REMOTE REPLACEMENT | Customer wants replacement for RM-S760 remote. These unitsare no longer available. Is there a replacement for this model? -HQ COMMENTS: The replacement is RM-S520. The part number isA-4372-026-A. | ||
Sony | STRAV560 | REMOTE REPLACEMENT | Customer wants replacement for RM-S760 remote. These unitsare no longer available. Is there a replacement for this model? -HQ COMMENTS: The replacement is RM-S520. The part number isA-4372-026-A. | ||
Sony | STRAV460 | REMOTE REPLACEMENT | Customer wants replacement for RM-S760 remote. These unitsare no longer available. Is there a replacement for this model? -HQ COMMENTS: The replacement is RM-S520. The part number isA-4372-026-A. | ||
Sony | SPP50 | RESET PCB CHANGE | The circuitry that was previously on a separate reset PCB isnow included on the Main PCB. The circuit design appears to be the same. -HQ COMMENTS: Thanks for letting me know about this. I faxed Tokyo andthey will send an updated PCB layout. They told | ||
Sony | SPPS10 | RESET PCB CHANGE | The circuitry that was previously on a separate reset PCB isnow included on the Main PCB. The circuit design appears to be the same. -HQ COMMENTS: Thanks for letting me know about this. I faxed Tokyo andthey will send an updated PCB layout. They told | ||
Sony | SPP50 | HANDSET AND BASE DO NOT COMMUNICATE | Technician has checked receiver and transmitter circuit inboth handset and base. Both operate correctly. Data can be seen goinginto micro at ID code input pin. Any suggestions? -HQ COMMENTS: Check to make sure handset and base both use the samechanne |