Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | KP46XBR25 | G BOARD AND A BOARD HAS +135 PRINTED ON BOARDSWRONG | Connector G2 (G board) and connector A2 (A Board) have +135printed on them. This is incorrect the true voltage is +115v DC. The-135 volt line is correct. | ||
Sony | KP46V16 | G BOARD AND A BOARD HAS +135 PRINTED ON BOARDSWRONG | Connector G2 (G board) and connector A2 (A Board) have +135printed on them. This is incorrect the true voltage is +115v DC. The-135 volt line is correct. | ||
Sony | KP46V15 | G BOARD AND A BOARD HAS +135 PRINTED ON BOARDSWRONG | Connector G2 (G board) and connector A2 (A Board) have +135printed on them. This is incorrect the true voltage is +115v DC. The-135 volt line is correct. | ||
Sony | KP46S15 | RUBBER CAP AS PER I/M PART NUMBER4-050-330-01 | Instruction Manual shows rubber caps as a accessorie, butdoes not give a part number. Nor, does this part appear in the ServiceManual. -HQ COMMENTS: The part number for these caps are 4-050-330-02. | ||
Sony | KP41T15 | RUBBER CAP AS PER I/M PART NUMBER4-050-330-01 | Instruction Manual shows rubber caps as a accessorie, butdoes not give a part number. Nor, does this part appear in the ServiceManual. -HQ COMMENTS: The part number for these caps are 4-050-330-02. | ||
Sony | KP41EXR96 | G BOARD AND A BOARD HAS +135 PRINTED ON BOARDSWRONG | Connector G2 (G board) and connector A2 (A Board) have +135printed on them. This is incorrect the true voltage is +115v DC. The-135 volt line is correct. | ||
Sony | FDLKB300 | REPLACEMENT BATTERY | If the NP-60D battery needs to be replaced the replacementbattery NP-68 is listed as the replacement. This is not correct as faras the FDL-KB300 is concerned. The NP-68 is larger then the originalNP-60D. Because of the NP68 size the rear cabinet can n | ||
Sony | STRGX700ES | UNIT DEAD - REPLACED F801, 802 Q754, AND Q753 | Unit dead. Found F801,802 blown, Q754, 753 shorted. | ||
Sony | STRD865 | DEAD - REPLACED F801, 802, Q703 AND 704 | Unit dead. Found F801, 802 blown, Q703, 704 shorted. | ||
Sony | STRD615 | IN PROTECT - REPLACED CPU & LEAKY Q603 | When power is turned on, unit goes to protect mode. | ||
Sony | STRD590 | UNIT SHUTS DOWN IF VOL CONTROLED BY REMOTE - SHORT IN CNP801 | Unit shuts down when the volume control is used by remote. | ||
Sony | STJX435 | UNIT REQUIRES EXTERNAL POWER SOURCE TO OPERATE | Unit will not power up by itself. Must have B+ at the syscontrol 1 input for it to work. | ||
Sony | SAW551 | NO AUDIO | Unit powers up audio comes out of headphones but not out of speakers. | ||
Sony | MDS501 | BROKEN DISPLAY PCB - REPLACED BROKEN DISPLAY BOARD | Board broken in half during shipping. The ams knob does notuse a retainer nut on the outside of the front panel. If pressure isapplied to the knob there is nothing to prevent damage to pc board. | ||
Sony | LBTD560 | REGULATOR IC1351 OVERHEATS | Unit appeared dead, but IC1351 was overheating. Found several pins shorted together due to improper soldering on this Malaysian unit. |