Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | CFS300 | REPLACEMENT PARTS HAVE CHANGED | A technician ordered the side plate for the handle with theP/N 3-313-604-00. The new part has different shape and it cannot fitin the handle. -HQ COMMENTS: Production changes have been done on both side plateand handle bar. Please order three parts: | ||
Sony | CFSF11S | PLAY MODE WILL NOT OPERATE | Unit locks up when put in play. Head deck appears to bebinding. Everything seems to be free when taken apart. Need operationalprocedure and troubleshooting guide. -HQ COMMENTS: Check if the NR slider moves. If not, check the FWD camgear and the reve | ||
Sony | CFSF11 | CRACKED GEAR | Cracked gear. | ||
Sony | CFS88S | BURNT SWITCH | Unit has no power or appears to be running on very low supplyvoltage. Type of supply (AC, DC internal, or DC external) irrelevant tosymptom. S903 (power switch) has developed high resistance due to contactburning. | ||
Sony | CFSF11 | GEAR ON RPH SHAFT CRACKS | The gear on RPH shaft cracks and prevents the head fromturning. If the head turns only part way around, the mechanism will jamand destroy other parts. -HQ COMMENTS: Although the gear is mounted onto the head, the gearcomes with the part as illustrated | ||
Sony | CFS99 | SUBSTITUTE PART WAS SMALLER | Substitute part was smaller. -HQ COMMENTS: Late production CFS-99s used a larger gear (AN) identifiedby P/N 3-579-641-00. Please make a note in your S/M. | ||
Sony | CFS45 | REPLACEMENT PART IS SMALLER | Replaced tape transport with X-3570-050-1. Found motor switchnot being activated due to arm on brake lever being too short to reachswitch. Transport P/N X-3570-050-4 has correct length arm. | ||
Sony | CFS500 | TRANSPORT JAMS | The unit's tape transport jams in the attempt to record forno apparent reason. Button lock plate bar #352 is bent at the recordlever #344. -HQ COMMENTS: I suspect abnormal customer force applied to the recordbutton while pressing another button at the | ||
Sony | CFS45 | PROPER SCREWS NEEDED | Since the latest (metal type) carrying handle side pieces havebecome available, I have had difficulty finding a usable screw type whichthreads properly into the also new threaded holes in these parts. | ||
Sony | CFS10 | END OF TAPE SENSOR NOT ALIGNED | As tape moves in play mode - end of tape sensor is not alignedfully with width of tape causing uneven pressure and wrinkling of tape. -HQ COMMENTS: The crease in the tape is indeed caused by excessivepressure as well as uneven placement of the PU lever | ||
Sony | CFS500 | TAPE JAM | Tape counter belt comes off and jams in take up spindle assy. | ||
Sony | CFS500 | MANUAL ERROR | Manual error. P. 30 (2) Ref. #16 shown #16 pointing to spkgrille should be Ref. #14. | ||
Sony | CFS45 | ERROR IN SERVICE MANUAL | The IPB on page 37 shows the capstan belt as a take-up belt.Also T/R S/B 66 gives a new P/N for the belt. -HQ COMMENTS: We are issuing a S/B and T/N. | ||
Sony | CFS45 | DEFECTIVE SIDE PLATES | Plastic handle side plates on this model break. Handle sideplates may not be strong enough to carry weight of this model under allstress conditions. | ||
Sony | CFS67 | OPEN R308, MOTOR AND FUNCTION SWITCH | No power in any function. Resistor 308 is open, switchfunction is shorted in tape mode and tape motor is at first shorted andthen open. -HQ COMMENTS: Charging current for C305 (1000uF) through the R308 burnsthe R308. We should replace it with other va |