Dicas Reparação
Modelo - Chassis CFS300
Pesquisa: CFS300 Enviar Dica Resolvida
Resultados 9
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CFS3000 | CASSETTE HOLDER | Lateral shoulders (cassette guides) are longer than original,so the new door will not stay closed. -HQ COMMENTS: The cassette holder you ordered is for CFS-3000 type II.There are two versions of CFS-3000 model names are the same but they areidentified o | ||
| Sony | CFS3000 | PROBLEM WITH EJECT BUTTON ON TAPE DRIVE UNIT | Unit would lock up and does not eject tape. | ||
| Sony | CFS300 | NO SOUND FROM TAPE PLAYER | AM/FM works fine, but no sound from cassette player. | ||
| Sony | CFS300 | PART NUMBER INCORRECT - IC3 | On page 18 and again on page 20, IC3 is stated to be a LA4126.On page 29 of the parts list, it is a LA4125T. Which is correct? Theseare not listed in the handbook as being interchangeable. -HQ COMMENTS: The correct part is LA4125T. Part # is 8-759-80 | ||
| Sony | CFS3000 | WRONG REAR CABINET | When rear cabinet is ordered by 3-319-547-01, part receivedwill not fit unit. The part, we need says Made in Korea on rear,whereas the part we are receiving says Made in Japan. Could you supplyus with the correct part number for the rear cabinet of the | ||
| Sony | CFS300 | INCORRECT PCB MARKING OF TRANSISTOR LEADS | B and E leads of Q301 are incorrectly marked on bottom ofPCB. Diagram of the manual is OK. | ||
| Sony | CFS3000 | NO SOUND ON BOTH CHANNELS | Output to headphone is okay, but no output to speakers.I found 3 units with the same problem. | ||
| Sony | CFS3000 | BENT BUTTON ASS | Bent button assy on left side where PLAYBACK and RECORDbuttons are locked. | ||
| Sony | CFS300 | REPLACEMENT PARTS HAVE CHANGED | A technician ordered the side plate for the handle with theP/N 3-313-604-00. The new part has different shape and it cannot fitin the handle. -HQ COMMENTS: Production changes have been done on both side plateand handle bar. Please order three parts: |