Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | CFS580 | MISSING PART NUMBER FOR LEVER, PANEL BUTTON | We need the part number for lever, panel button on page 33 ofthe manual. -HQ COMMENTS: Sorry, the part is no longer available. | ||
Sony | CFSD7 | INTERMITTENT FUNCTIONS | Unit will only go into REWIND or RECORDING mode inter-mittently. STOP button will have no effect. Disconnecting power cordwill reset unit to STOP mode. Pressing any function button, the unit willgo only into REWIND. | ||
Sony | CFSF11 | HUM NOISE WITH AC-190 | When using the AC adaptor AC-190, a slight hum noise is heardthrough the headphone in the play mode, even when the volume control isminimum. | ||
Sony | CFS3000 | WRONG REAR CABINET | When rear cabinet is ordered by 3-319-547-01, part receivedwill not fit unit. The part, we need says Made in Korea on rear,whereas the part we are receiving says Made in Japan. Could you supplyus with the correct part number for the rear cabinet of the | ||
Sony | CFSF11 | NO RECORD | Pause is engaged before record. Indicator lights but recordlinkage is not engaged. The record trigger lever is jarred off recordlever A (see P.10 of the supplement #1). -HQ COMMENTS: Replacement of forward lever is necessary. The problemcomes from th | ||
Sony | CFS300 | INCORRECT PCB MARKING OF TRANSISTOR LEADS | B and E leads of Q301 are incorrectly marked on bottom ofPCB. Diagram of the manual is OK. | ||
Sony | CFSF11 | TAPE TRANSPORT MALFUNCTIONS | Head rotation gear is cracked. Replacement as per TNLA0022/TRSB #146 is performed. The transport still jams or hangs up inter-mittently in either forward or reverse play modes. -HQ COMMENTS: Head rotation gear has been updated from plastic to ALdie-ca | ||
Sony | CFS3000 | NO SOUND ON BOTH CHANNELS | Output to headphone is okay, but no output to speakers.I found 3 units with the same problem. | ||
Sony | CFS5000 | NO SOUND ON TAPE PLAYBACK | No sound on tape playback. Other functions OK. AMS seems towork. In PLAY (with cassette in) AMS solenoid occasionally kicks. | ||
Sony | CFS3000 | BENT BUTTON ASS | Bent button assy on left side where PLAYBACK and RECORDbuttons are locked. | ||
Sony | CFSF11 | HEAD MISALIGNMENT PROBLEMS | Part # X-3313-714-0 does not have same screw mounting centersas original part, so cannot be mounted on deck. Also does not have basicconfiguration of original part. Need part # of original part. -HQ COMMENTS: Checked two head brackets: one original an | ||
Sony | CFS77 | MOTOR PULLEY | The pulley being supplied by KC is for a square belt. Thepulley required is for a flat belt. KC insists that they are providingthe correct part. Please investigate this problem for me. -HQ COMMENTS: Two pulleys are listed under the same Ref. No. 455 | ||
Sony | CFS9000 | BROKEN GEAR OF HEAD BRACKET ASS | The gear seems so hard. It is easily broken. | ||
Sony | CFSF11 | JAMMED DECK | Head gear P/N 3-313-754-01 broke jamming deck. Afterreplacing gear, and replacing ball's back under head table, in RWD orREV mode head table does not come up enough to lock in position. With nodisassembly instructions unit cannot be serviced successful | ||
Sony | CFSF11 | PART NUMBER FOR SPLIT GEAR | Found split gear on bracket assy head (#424) on two units.I would like separate part # for gear, or is it included in bracket assypart # X-3313-714-0? -HQ COMMENTS: The gear is available separately. The part # is3-313-754-01. Please refer to the T/N |