Dicas Reparação
Modelo - Chassis D10
Pesquisa: D10 Enviar Dica Resolvida
Resultados 205
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CVD1000 | A symptom of no picture in the pause mode was caused by amissing clock signal to ICs 657 and 658. This was caused by an open tracebetween those ICs and IC651 pin twelve, the clock source. | |||
| Sony | STRD1090 | NO AUDIO ON LEFT CHANNEL - REPLACED IC404, 408, AND 417 | Unit had no left channel. Completely no audio on the left.Unit has defect on surround board, IC404 and IC408 defective. Ireplace board but the new board was missing IC417. No audio at this time. | ||
| Sony | STRD1011S | PROTECTION LIGHT ON - REPLACED IC601 AND IC602 | Protection light on. -SOLUTION IC601 and 602 short out. Replaced two ICs and unit worked. | ||
| Sony | HCDD108G | CD WILL NOT LOAD/UNLOAD - REPAIRED OPEN TRACE ON BD BOARD | The CD would not load or unload a disc. All other functionsworked correctly. | ||
| Sony | FD10A | RASTER BUT NO VIDEO, REPLACED BAND SW, 1-570-377-11 | Raster no video. | ||
| Sony | STRD1090 | INTERMITTANT MUTING - RESOLDERED CLASS A BOARD | Intermittent muting (-20db). | ||
| Sony | STRD1090 | SURROUND BOARD CHANGE | The surround board has been changed. In supplement - 2it gives us the circuitry change of the surround board but no part number.If you order part A4347-979-A it comes with IC 417. Not like the changein supplement - 2. I need the part number for the | ||
| Sony | STRD1011 | NO REMOTE VOLUME OPERATION - IC231 INSTALLED BACKWARD | IC231 driver put in backward by factory. | ||
| Sony | STRD1011 | MUTE BUTTON DOESN'T WORK - REPLACED DEFECTIVE Q255 | Front speaker output is very low, muting button lights up butdoesn't work. I found Q255 on A class board defective. | ||
| Sony | HSTD105 | SPOT FROM OVERDISSIPATION NOTICEABLE ON MCB | Motor is possibly causing damage to the MCB. Consumption ofthis part is increasing gradually. It seems that the most cost effectiveway to solve this problem may be to install a smaller wattage resistorR-538? Please evaluate. Note: Missing parts on th | ||
| Sony | FD10A | NO TUNING BAND SWITCHING, REPLACED SWITCH S-151 | Won't switch bands. | ||
| Sony | HSTD107 | AUDIO CUTS OFF ON HIGH VOLUME - RESOLDERED C1222 | Unit has no audio on high volume (more than 25% of the volumeknob). A visual inspection of the main board shows C1222 has no solder onthe negative side of the capacitor. | ||
| Sony | HSTD107 | LEFT CASSETTE NOT WORKING - REPLACED MISSING PCH ROLLER ASSY | Left cassette take up reel operates correctly as does the headassy and other mechanics. The pinch roller was missing on the left deck. | ||
| Sony | STRD1011 | DISPLAY FLICKERS AT HIGH VOLUME - CHANGED R783 TO 100 OHMS | The voltage at the collector of Q961 drops at high volume on aohm load, causing the display to flicker. | ||
| Sony | HSTD107R | BOTH TAPE DECKS WON'T WORK - REPLACED DEFECTIVE IC901 | Both tape decks are dead. Found IC901 pin 9 has -14V andpin 2 has .6V, supplying incorrect voltages to decks A and B drive motors. |