Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | CCDTR7 | HOLDER BLOCK ASSEMBLY FOR CCDTR7 | Is there a part number for the holder block assembly for theCCDTR7? There is a part number for the CCDTR5 holder block (ref no. 151in the TR5 manual), but it does not have the eject springs (ref. no. 157and 153 in the TR7 manual) included, and there are | ||
Sony | D9 | UNIT WILL NOT WORK WITH BATTERIES (INTERMITTANT) | Unit will work with AC adaptor, but intermittently will notwork with batteries. It will play with batteries when you press the P.C.board. | ||
Sony | STRAV320 | UNIT SWITCHES OFF AFTER TWO - TEN MINUTES | Unit switches off after two - ten minutes. There is stillplayback with volume control at zero and when surround sound is switchedon a loud buzz occurs. | ||
Sony | CDPC201 | PROBLEMS WITH LOADING DISC | Unit(s) won't load some discs and chucking arm is defective.Is there any part number for the arm which shows Not Supplied? -HQ COMMENTS: Tokyo fax reply A910519 and A910520: P/N is A-4604-241-A.This part is currently not registered in KCP. | ||
Sony | WMF2097 | MISSING PART NUMBER IN SERVICE MANUAL | Servicer needs gear but part number is not in service manual.The gear is shown on page 26 of the S/M and is mounted at the center onthe Chassis Complete Assy Ref 376. It is the largest gear shown towardthe middle of the assembly and meshes with Ref 362. | ||
Sony | SLHF870D | THREADING BLOCK ASSEMBLY PART NUMBER | Part for threading block assembly A-6751-378-A cannot be foundin computer parts system. | ||
Sony | CCDV101 | LENS REFLECTION IN PICTURE | A customer is complaining of a crescent shaped reflection inthe lens of his CCDV101. Please see enclosed video tape of the problem. | ||
Sony | CCDF36 | AFTER 5 - 30 MINUTES NO CAMERA VIDEO | After 5 - 30 minutes, no camera video. At first, video be-comes unstable flickering on and off. Upon inspection, no video out ofQ-617 and Q-619, Y and C mix. Checked voltages, intermittent correctvoltages. Checked 5V line, seemed to be shorting to g | ||
Sony | KV27VX1P | UNIT WILL NOT TURN ON - SHUTS DOWN IMMEDIATELY | Unit will shut off as soon as it has powered up (has momentaryhigh voltage). Attempted to defeat shutdown circuit, still will not powerup. Checked power supply, (as I believe something has overloaded powersupply). Found IC-952, pin 9 has a short to gr | ||
Sony | TCDD10 | INTERMITTENT MUTING OF AUDIO | Intermittent unit would mute audio. RF envelope wasbreathing. | ||
Sony | XK8D | WIRE HARNESS NOT PROVIDED WITH NEW HEAD ASSEMBLY | New head assembly should come with cable and connector asshown in the service manual on page 20 (Ref. HP101). Head was ordered andreceived without cable. -HQ COMMENTS: The part number for the harness is 3-372-153-01, and theyare stocked in N.P.C. We | ||
Sony | KV27XBR10 | DEAD, SHORTED HOR. OUTPUT Q-503, SEE SERVICE BULLETIN 161R1 | Q-503 was shorted. | ||
Sony | SPP50 | NO COMMUNICATION BETWEEN BASE AND HANDSET. | No communication between base and handset. | ||
Sony | XR7077 | INCORRECT PART NUMBER AND TYPE IN SERVICE MANUAL, Q325 | The parts list in the service manual shows Q325 as a2SA1175HFE, p/n 8-729-119-76, which is a different type and package thanthat which is shown on the schematic. The type shown on the schematicis the correct type (2SB1132), which now subs to type 2SB111 | ||
Sony | XR7080 | BEEP TONE NOT WORKING | Customer sent unit for repair because beep tone stoppedworking. Tried to turn on beep tone by pressing SELECT and 6 keys, butbeep tone would not come back. -HQ COMMENTS: Unit was being bench tested by using line out from unit.This model only has beep t |