Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | SLVR5UC | INTERMITTENT SNOWY PIC: SOLDER TOGETHER THE SHIELDS OF RP76 | The picture would intermittently degrade, turning to snow,similar to clogged heads. | ||
Sony | CCDTR200 | CCD IMAGER BLOCK ASSY/USE OLD ITEMS 128, 129, 130 | The images will not fit the lens as shipped. See pages 185CCDTR200 of the service manual. The part comes complete with IC721,numbers 128, 129, and 130. The items are too thick for screws to mount. | ||
Sony | CCDF301 | HOW TO DIFFERENTIATE LENS TYPES | There are two lens assemblies in the service manual. How doyou know which one is which? -HQ COMMENTS: There are two lens types - XE (1-547-422-11) and XF(1-547-412-12). The XE lens has the Sheet, F (REF #417) on the top of thelens. The XF has the sheet | ||
Sony | SPP300 | NO AUDIO TO/FROM CORDLESS HANDSET- INTERCOM OK - (IC-507) | The unit's handset would not receive or transmit audio to orfrom the outside line. The intercom function worked normally meaning theproblem must be in the base unit. I found pins 11, 12 and 13 of IC507 atvarying voltages causing the output pin 10 to st | ||
Sony | KV19TR20 | UNIT SHUTDOWN AFTER 30 SEC TURNED ON, R568 VALUE CHANGE | The unit would go into shutdown after about thirty(30) secondsof operation. | ||
Sony | KPR4110 | LINES ON PICTURE & DISTORTED SOUND, LOOSE GND SCREW ON E PCB | The unit presented horizontal lines on the picture and distorted sound. | ||
Sony | CDPC335 | NO OPTICAL PICKUP FUNCTIONS (RESOLDER CN101 AND CN102) | Laser of CDP-C235 would not turn on, no focus, and opticinoperable. There was no +5V on pin 7 of CN101 or pin 5 of CN102. | ||
Sony | CDPC900 | PART # INFO, OPTICAL PICKUP HARNESSES (P/N 1-946-072-21) | The part numbers for the harnesses from the pick-up assemblyto the main board CNP101 and CNP102 are missing from the service manual. -HQ COMMENTS: The National Parts Center has researched the part numberand informed us that the part number is 1-946-072- | ||
Sony | CCDFX310 | UPPER CABINET PART NUMBER INCORRECT | The description of the part is not correct - X-3941-666-1 isfor the FX310 and X-3941-211-1 is for the FX311. | ||
Sony | CDPC9ESD | PART # INFO, OPTICAL PICKUP HARNESSES | The part numbers for the harnesses from the pick-up assemblyto the main board CNP101 and CNP102 are missing from the service manual. -HQ COMMENTS: The National Parts Center has researched the part numberand informed us that the part number for the harne | ||
Sony | SLV700HF | WILL NOT LOAD TAPE: LOADING GEAR 306 | When putting the tape in the unit, it would take in tape thena grinding noise would be heard and it would then eject. | ||
Sony | SLVR5UC | EATING TAPES: SUB CHASSIS BLOCK ASSY. (303) | Eating tapes when in forward scan and reverse scan. | ||
Sony | D20 | PLATTER ON CLV MOTOR WARPED | CLV motors for the DT24, D2, D40, D11, and D20 are beingreceived by ASC's with the disk platters warped. This part is new outof the box. | ||
Sony | SLV700HF | SQUEAL IN REWIND: REPLACE ROLLER POST (202) | In rewind mode there is a squeal. | ||
Sony | D11 | PLATTER ON CLV MOTOR WARPED | CLV motors for the DT24, D2, D40, D11, and D20 are beingreceived by ASC's with the disk platters warped. This part is new outof the box. |