Service Mode (Modo de Serviço)








Marca
Mod.
Ch.
Tipo
Modo
Proced.
File
SHARP
TV
Service Mode
1. Connect a test pattern to the antenna terminal.
2. Tune the receiver to this signal.
3. Turn the receiver off using the mains switch.
4. Press volume down and channel up buttons on the front of the receiver at the same time.
5. Keeping these buttons pressed, turn the mains on.
6. When the set starts up it will be in Service Mode. 7. Release the two buttons.
# Use the channel up and down buttons to move between the options.
# Use the volume control buttons to change the data.
# To store the data, use the stand-by button on the remote control.
# To exit the Service Mode, turn the receiver off using the mains switch.
SONY
TV
Service Mode
1. TV must be in standby mode. (Power off).
2. Press the following buttons on the Remote within a second of each other: DISPLAY->Channel->5->Volume +
TV POWER

The first service menu (TV) displays More information in PDF
EMERSON
TV
Service Mode
1.Turn ON the Power.
2.Press MENU button to display Setup Menu.
3.Select FEATURES.
4.Select CURRENT SOFTWARE INFO.
5.0,4,2,5,7,4 and INFO buttons on the remote.
The service mode screen will appear.
SYLVANIA
TV
Service Mode
1.Turn ON the Power.
2.Press MENU button to display Setup Menu.
3.Select FEATURES.
4.Select CURRENT SOFTWARE INFO.
5.0,4,2,5,7,4 and INFO buttons on the remote.
The service mode screen will appear.
MAGNAVOX
TV
Service Mode
1.Turn ON the Power.
2.Press MENU button to display Setup Menu.
3.Select FEATURES.
4.Select CURRENT SOFTWARE INFO.
5.Insert 0,4,2,5,7,4 and INFO buttons on the remote.
The service mode screen will appear.
SONY
TV
Service Mode
1. TV must be in standby mode. (Power off).
2. Press the following buttons on the Remote within a second of each other: DISPLAY->Channel->5->Volume +
TV POWER

The first service menu (TV) displays More information in PDF
NOBLEX
TV
Service Mode
Pulsar rapidamente la siguiente secuencia en el C/R: Nº Canal, Pausa, Ap.Prog, Imagen Norm., aparecerán los menúes Factory1/2/3. Con CANAL+/- se modifica el menú Factory. Con VOL+/-, se ingresa a cada sub menú.
GRUNDIG
TV
Service Mode
Pulsar rapidamente a seguinte sequência no remoto:
Nº Canal->Pausa->Ap.Prog->Imagem Norm.
aparecem os menus Factory1/2/3.
CANAL+/- modifica menu Factory.
VOL+/-, sub menu.
KEN BROWN
TV
Service Mode
Introduzir no remoto a sequência: MENU, MENU, QVIEW, MUTE e em seguida SLEEP.
TONOMAC
TV
Service Mode
Com O tv ligado, curtocircuitar os pontos marcados com PROBE (pino 78 do chip), Selecionar itens com CANAL +/- eAjustar valores com VOL+/-.