Dicas Reparação




Modelo - Chassis XR780


Pesquisa: XR780 Enviar Dica Resolvida
Resultados 9
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyXR780
NO AM OR FM OPERATION No AM or FM. DC voltage at emitter of Q225 was 7.4VDC insteadof 8.8VDC. Although the regulator transistor (Q225) did not check open orshorted, it would not function in the set.
SonyXR780
AM/FM TUNER LOCK-UP When advancing tuning manually, tuner would advance approx.2/3 of the way up the band normally, after which point the display wouldcontinue to advance, but actual station tuning would not. In scan mode,tuner would advance 2/3 of the way up the band, aft
SonyXR780
PART NO FOR SPRING 428 Need P/N for spring #428, other part has #428 also, needspring only. -HQ COMMENTS: The P/N is 3-596-509-01 which is Ref. No. 427.
SonyXR780
PART NUMBER MISSING Protector (P/N 3-323-287-01) not called out on prints. Also,many breaking. Suggest fingers be made stronger. -HQ COMMENTS: A service bulletin has just gone out regarding thisproblem. We will notify Tokyo of breakage.
SonyXR780
SERVICE MANUAL ERRATA Service manual errata. S701, S702, S703 are incorrectlyidentified on page 41 of both manuals. S701 is tape direction switch.S702 is tape-in switch. S703 is tape-out switch. All are located on theMD board. -HQ COMMENTS: A service bulletin will be iss
SonyXR780
SERVICE MANUAL ERRORS IN LABELLING OF SOLENOIDS S/M errors in labelling of solenoids. PM701 on Pg 41 ofXR-740/747R/780/787R should be PM703 (direction change solenoid). Thiswould agree with their schematics and mounting diagrams. PM901 on Pg 34of XR-80 and Pg 38 of XR-66 should be PM903 (direction)
SonyXR780
TAPE JAMS Tape jams. The gears (A, B, Assy RVS) are stripping. Eitherthey strip causing tape to jam or tape jams causing gears to strip.
SonyXR780
NO TAPE OUTPUT Audio output of tape section ceased after one month.Infrequent intermittent operation after that.
SonyXR780
DEAD OUT OF THE BOX Unit turns on and lights up but is muted.


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads