Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | XR747R | EJECT MECHANISM RECYCLES TO PLAY | Cassette eject mechanism does not lock in the ejectedposition. The eject plate number 358 is not being locked by the triggerplate number 354. | ||
Sony | XR747 | JAM IN EJECT CYCLE | Distributor had three units in that were jammed in the ejectcycle. All three units had the new timing board added. The board did notresolve the jamming problem. | ||
Sony | XR747R | JAM IN EJECT CYCLE | These units were jammed in the eject cycle. The tech. at H.G.Brix came up with this fix. Believes that the units are not finishingthe eject cycle from the previous eject. When the tape is installed andplayed the second time and then ejected, it will j | ||
Sony | XR747R | LOCKUP OF MICROPROCESSOR | Unit locked up. Stuck on 530AM. No buttons had any input. | ||
Sony | XR747R | PART NO PROBLEM IN MANUAL | Above part number not in system. Looking at fiche I foundpart number A-3217-255-A as correct number for filter assy in XR-747R. -HQ COMMENTS: The number from the microfiche is correct (A-3217-255-A).A service bulletin will be issued. |