Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | XR7070 | SCHEMATIC AND MOUNTING DIAGRAM ERRORS: IC104 PIN 1 LOCATION | The print on page 27 of the service manual for the IC104 #1pin related to the actual IC chip is incorrect. The pin #1 is not at thecorner cut. | ||
Sony | XR7070 | NO DISPLAY, UNIT BEEPS WHEN BUTTONS PUSHED, NO OPERATION | After applying power to unit, I could hear a beep whenever Ipushed a button, but no other activity occurred. After I pressed Reset,the display lit up in FM Mode, but none of the buttons had an effect, ex-cept FM/AM which caused the display to turn off. | ||
Sony | XR7070 | TAPE STICKS WHEN EJECTING | Tapes are intermittently sticking inside when ejected. Thereturn link has a square bend on the end toward the rear of the deckand an agular bend on the front. If the spring is installed backwards, itcauses the problem. -HQ COMMENTS: Thanks for the info. | ||
Sony | XR7070 | CORRECT PART NUMBER FOR Q325 | What is the correct generic and nine digit part number forQ-325? The schematic calls for a 2SB-1132. However, in the parts list,it lists Q325 as a 2SB-1175HFE. The transistor is a chip component, andthe only markings on it are AB. What part is suppos |