Dicas Reparação




Modelo - Chassis XR65


Pesquisa: XR65 Enviar Dica Resolvida
Resultados 12
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyXR6500
NO FM STEREO AFTER 20 MINUTES After twenty minutes or less, the FM stereo indicator will goout, and the unit switches to mono.
SonyXR6500
INCORRECT PART NUMBER IN SERVICE MANUAL, IC-2 The part number in the service manual for IC-2 is incorrect.
SonyXR6500
NO AUDIO ON AM OR FM Dolby IC had input signal but no output.
SonyXR6500
REW/FF KNOB FALLS OFF I have had three customers call that have this unit that com-plain that the FF/REW knob comes off when they pull it to perform FF/REW.
SonyXR65
NO AUDIO OUTPUT No output to speakers. Signal was getting to output IC butnot coming out. DC voltages on IC were wrong, so I changed the IC, stillno output. Resistance measurements on IC revealed short from Pin 3 toground, found shorted capacitor C339.
SonyXR65
INTERMITTENT SQUEAL ON FM Intermittent squeal, FM only.
SonyXR65
DISTORTED SOUND Distortion in audio when listening to radio (FM) and systemEQ switch was turned on, but system EQ did not distort on tape. But iflistening to tape and Dolby was turned on, unit had several distortion.
SonyXR65
FM SQUEAL Audible screech when receiving a stereo signal. FM monothere was no problem.
SonyXR65
FM DRIFT FM would come in with stereo indicator lit when unit was firstturned on. After about 20 minutes stereo LED would go out. Slightlyadjusting RV4 would turn indicator back on for a short time before itdrifted again. Found that by hitting C48 with freeze
SonyXR65
CONTINUOUSLY SCANS (AM) Unit continuously scans in AM mode.
SonyXR65
MALFUNCTIONING IC303 AMS worked. Display would not light up. IC303/Q outputalways low.
SonyXR65
OPEN TRACE Foil open on volume control board. This foil appears to haveburned open.


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads