Dicas Reparação
Modelo - Chassis XR5500
Pesquisa: XR5500 Enviar Dica Resolvida
Resultados 9
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | XR5500 | EXTENSION CABLE FOR REPAIRING DISPLAY MCB (J-2502-009-4) | It may be difficult to repair the display MCB without using anextension cable. | ||
| Sony | XR5500 | TAPE DECK MOTOR RUNS CONSTANTLY | Tape motor (M-900) keeps running, even during radio play. | ||
| Sony | XR5500 | PART NUMBER CORRECTION, BT601 LITHIUM BATTERY | The part number shown in the XR-5500 service manual isincorrect (1-528-225-11). | ||
| Sony | XR5500 | MISSING PART NUMBER, KNOB (HANDLE FITTING) | The lift tab on the handle (knob, handle fitting) does notcome with the new handle and most service manuals do not have the partnumber listed. | ||
| Sony | XR5500 | EJECT MECHANISM STUCK | If Eject lever is not pushed all the way in, and tape is re-moved, the holder assembly moves to load position (down position). Whenyou try to eject again (move to loading position), it will not workbecause lock assembly eject cam gets in the way of the | ||
| Sony | XR5500 | RADIO SECTION INOPERATIVE AFTER EJECTING CASSETTE | The above symptom may occur due to a slight misadjustment ofthe small tab on the eject cam lock assy. After ejecting a tape, themisadjustment of the tab allows the carriage assy to drop back down intothe tape-loaded position, which turns on S901 (tape d | ||
| Sony | XR5500 | TAPE STICKS WHEN EJECTING | Tapes are intermittently sticking inside when ejected. Thereturn link has a square bend on the end toward the rear of the deck andan angular bend on the front. If the spring is installed backwards, itcauses the problem. Also pertains to serial number 50 | ||
| Sony | XR5500 | HANDLE COMING OFF WHEN CUSTOMER REMOVES UNIT FROM BRACKET | District office CIC has received three customer complaints dueto the handle coming off their removable car stereo unit as they pull fromthe bracket. Will attempt to get a sample. This part is used in severalmodels. -HQ COMMENTS: Tokyo has been made aw | ||
| Sony | XR5500 | MISSING PART NUMBER FOR PM900 | The part number for the plunger solenoid shown on page 13 asPM-900 does not have a part number listed. The same solenoid is shown onpage 15 as PM1.To Tokyo: What is the part number of this solenoid which is shown as twodifferent references?Tokyo Fax:(RE |