Dicas Reparação
Modelo - Chassis XR50
Pesquisa: XR50 Enviar Dica Resolvida
Resultados 6
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| PHILIPS | NTXR500 NTXR700 NX5 NX7 | funciona e perde o som devagar, ao tocar no mixer o som volta alto. | capacitor smd | na placa main, observar o flat que vai pro amplificador. na parte que esta soldado na main, seguir a linha de audio nele, tera dois capacitores fazendo acoplamento em serie com o sinal. só trocar. | tecnardi |
| Sony | XR5000 | TAPE STICKS WHEN EJECTING | Tapes are intermittently sticking inside when ejected. Thereturn link has a square bend on the end toward the rear of the deck andan angular bend on the front. If the spring is installed backwards, itcauses the problem. -HQ COMMENTS: Thanks for the inf | ||
| Sony | XR5000 | WIRE HARNESS PART NUMBER IS INCORRECT | The part number given in service bulletin CAR 118 is in-correct. That cord will not work for the front and rear lines out. | ||
| Sony | XR5000 | NO AUDIO ON TAPE LEFT CHANNEL | No audio on tape left channel (forward and reverse). Radiochannels ok. | ||
| Sony | XR50 | CASSETTE EJECTED SOON AFTER LOADED | Cassette ejected soon after loading. The DM-101A(P/N 8-745-101-01) DME had failed along with Q602 (voltage reg) and D602(voltage ref). -HQ COMMENTS: The output of my sample DME is a sine wave of 0.1VACcontaining a 3.6VDC component. Its output is a pro | ||
| Sony | XR50 | SOLENOID DRIVE TRANSISTOR | Cass. will manually eject, but not automatically at end oftape play. |