Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Panasonic | Alpha 1 TXC71 | Sound noisy - ok thro scart | C2401 dry joint on AV/tuning/control board | ||
DIGITAL | PCXCV-AC | NÃO FUNCIONA | RESISTOR R776 (15K) ABERTO (PRÓXIMO AO TRAFO DA FONTE) 99% DE POSSIBILIDADE | ||
DIGITAL | PCXCV-AC | NÃO FUNCIONA | RESISTOR R776 (15K) ABERTO (PRÓXIMO AO TRAFO DA FONTE) 99% DE POSSIBILIDADE | ||
Sony | EXCD90 | CD DOES NOT PLAY, DISPLAY READS E-04 | The LCD display of the unit reads E-04. This may be caused bythe CD making contact with the chucking arm (ref# 122). This may cause theCD not to spin and eventually displaying an error message. | ||
Sony | EXCD60 | CD DOES NOT PLAY, DISPLAY READS E-04 | The LCD display of the unit reads E-04. This may be caused bythe CD making contact with the chucking arm (ref# 122). This may cause theCD not to spin and eventually displaying an error message. | ||
Sony | EXCD51 | CD DOES NOT PLAY, DISPLAY READS E-04 | The LCD display of the unit reads E-04. This may be caused bythe CD making contact with the chucking arm (ref# 122). This may cause theCD not to spin and eventually displaying an error message. | ||
Sony | EXCD50 | CD DOES NOT PLAY, DISPLAY READS E-04 | The LCD display of the unit reads E-04. This may be caused bythe CD making contact with the chucking arm (ref# 122). This may cause theCD not to spin and eventually displaying an error message. | ||
Sony | CDXC590 | CD DOES NOT PLAY, DISPLAY READS E-04 | The LCD display of the unit reads E-04. This may be caused bythe CD making contact with the chucking arm (ref# 122). This may cause theCD not to spin and eventually displaying an error message. | ||
Sony | CDXC490 | CD DOES NOT PLAY, DISPLAY READS E-04 | The LCD display of the unit reads E-04. This may be caused bythe CD making contact with the chucking arm (ref# 122). This may cause theCD not to spin and eventually displaying an error message. | ||
Sony | CDXC490 | NO HIGH OR LOW LEVEL AUDIO OUTPUT ON BOTH CD & RADIO | Unit's output IC was defective. After changing output ICthere was no high or low level audio from both CD & Radio. This was dueto the unit being tested with the MCB outside of the frame assembly.Once unit was put back together and with back plate on, no | ||
Sony | CDXC410 | OUTPUT ONLY EXISTS ON ONE CHANNEL | The audio output only exists on one channel. Theproblem MAY be related to IC301 | ||
Sony | EXCD31 | LOADS DISC, WON'T CLAMP (CLEANED AREA BETWEEN REF 161 & 159) | Would load disc, but not clamp it. Found that the D-lever(ref. 161) was sticking, which prevented the TR circular rack gear toengage (this rack gear is not referred to in the service manual, but isatached to TR tension spring ref. 163). | ||
Sony | EXCD1RF | PART AVAILABILITY: HIDEAWAY/COMMANDERS | The manual has no part number for Hideaway units and Wiredcommanders that are defective and cannot be repaired to component | ||
Sony | EXCD1RF | DISPLAY MAIN BOARD PART NUMBER | The part number shown for the EXCD-1RF Display Main Board isthe same as the part number shown for the Off button (ref#352). | ||
Sony | CDXC810DSP | LOADS DISC, WON'T CLAMP (CLEANED AREA BETWEEN REF 161 & 159) | Would load disc, but not clamp it. Found that the D-lever(ref. 161) was sticking, which prevented the TR circular rack gear toengage (this rack gear is not referred to in the service manual, but isatached to TR tension spring ref. 163). |