Dicas Reparação




Modelo - Chassis WMSXF39


Pesquisa: WMSXF39 Enviar Dica Resolvida
Resultados 6
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyWMSXF39
GEAR (REEL) (R) NOT ILLUSTRATED IN SERVICE MANUAL The GEAR (REEL) (R) is not illustrated in the service manualand is not assigned a part number. The Deck Mechanism on page 20illustrates item 109, GEAR (REEL) (L), but this part is slightly differentfrom its counterpart. -HQ COMMENTS: Contact Kansas Cit
SonyWMSXF39
FF BUTTON STICKING - REPLACE CHASSIS ASSY, P/N X-3367-210-1 Fast forward button sticks. Part of the fast forward leveris broken, therefore, the retraction spring won't work correctly.
SonyWMSXF39
TAPE GUIDE DOES NOT FIT ON SS CHASSIS ASSY Tech ordered Ref 101 part X33672101, chassis assy. Did notcome with tape guide Ref 105, 390573301. Tape guide ordered but holes donot line up with chassis. Chassis not same as original -HQ COMMENTS: Per KCP: Checked stock on 12/6/94, all chassis ass
SonyWMSXF39
NO CLOCK/NO RADIO/NO DISPLAY - RESOLDER AND REINSERT CN401 (CN401) Flex dislodges from connector. The flex appears to betoo short. Also, inserting batteries into battery compartment may loosenflex from CN401. This is the 2nd unit I have seen with this problem.
SonyWMSXF39
PART RECVD DOES NOT MATCH EXPLODED VIEW X33672101 should include all chassis parts, but comes as aempty chassis. -HQ COMMENTS: KCPS checked with WRPC on this problem. WRPC checked theirstock and confirmed your report: WRPC stock was wrong. The correctedinventory will be sent to KCPS from WRPC
SonyWMSXF39
NO CLOCK/NO RADIO/NO DISPLAY - RESOLDER CONNECTOR CN401 The clock, radio, and stop watch were not working and therewas no display. Checked ribbon cable connector (CN401) on the displayboard. It looked okay, but no voltage was coming onto the board.


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads