Dicas Reparação
Modelo - Chassis WMF80
Pesquisa: WMF80 Enviar Dica Resolvida
Resultados 5
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | WMF80 | BAND SELECTION KNOB PART NUMBER IS WRONG | Servicer ordered knob by number in manual. Could not accessTV mode due to physical obstruction. Parts fiche says this is for aWM-F77. There is another part number 3-335-732-01 with a description ofknob (C), tuning, that the parts fiche claims to be pa | ||
| Sony | WMF80 | INTERMITTENT RADIO | Radio does not work. | ||
| Sony | WMF80 | PART NUMBER FOR FLEX CONNECTOR | I have been faxed a S/B No. 230 which gives a P/N for CN302.But, as I have described before, I require the P/N for the flex connectorbetween the EQ unit and the main PCB. These connectors keep tearing dueto their faulty design. It is very expensive to | ||
| Sony | WMF80 | RIBBON CABLE CONNECTOR PART # | Need the part # for the connector on the main board whichfastens the ribbon cable from the equalizer board. If opened, thisconnector will not hold tightly enough when re-fastened. -HQ COMMENTS: Part number is 1-563-364-11. Please order from KCP. | ||
| Sony | WMF80 | NO SOUND OUT OF UNIT BOTH ON RADIO AND TAPE | Graphic equalizer unit is not making contact with main boardthru CN302. Ribbon is just laying inside unit without being into contactsof CN302. |