Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | WMD3 | NEW MOTOR DOES NOT FIT | Servicer ordered a motor, part # X-331-616-1, the originalmotor has markings 12CL-3024A & 910213-C, the new Motor has MNR-1602A. Thenew motor has a shorter shaft than the old one so it does not fit right.Do you have any suggestions or information on what | ||
Sony | WMD3 | NO RECORDING ON LEFT CHANNEL - REPLACE IC302 | No recording on left channel. | ||
Sony | WMD3 | REPLACEMENT OF DRIVING LEVER ASSY CAUSES MECH IRREGULARITIES | After replacing X35781420 driving lever assy for splitgears, unit will grind or slip into FF and Rew. -HQ COMMENTS: Please refer to FPR N1126. | ||
Sony | WMD3 | UNCONTROLLABLE TAPE SPEED | Tape runs too fast. Cannot adjust tape speed. | ||
Sony | WMD3 | INTERMITTENT OUTPUT FROM HEADPHONES OR LINE OUT | Intermittent output from line out or headphone out. Flexingcircuit board would show problem better. | ||
Sony | WMD3 | NO REWIND - CLICKING NOISE | Loud clicking noise and no Rewind function. I found therewind gear to be cracked on the under side of the gear. This caused aproblem with the gear meshing and slipping. The noise is from the gearnot meshing and slipping is due to the gear not fitting | ||
Sony | WMD3 | NO RECORD; ERASE ONLY | No record erase only. Playback of prerecorded tapes was ok. | ||
Sony | WMD3 | MISSING PART NUMBER - ROTOR ASSEMBLY | Incorrect: Ref #141 P/N missing. Description missing. Correct: Ref #141 P/N X-3310-905-00 Description - Rotor Ass'y -HQ COMMENTS: We issued a S/B in Oct. 1986 concerning the missing P/Nfor the rotor ass'y. It is Tape Recorder S/B #216. |