Dicas Reparação




Modelo - Chassis TX91


Pesquisa: TX91 Enviar Dica Resolvida
Resultados 39
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
ThomsonRCT3003 chassis TX91
imagem c/grao via tuner, via scart imagem perfeitatroca c.electr.perto do tuner e ressoldar o tuner no interior
ThomsonTX91
posição vert. deslocada 10 cms.para cimaTL 13_ BC338 linha dos 13 V. defeituoso
ThomsonChassis TX91G
Não Funciona - led frontal pisca em vermelhoSubstituir Memoria 24C04
FERGUSONTX913
Correção E/O não actuaD97 em curto circuito
Thomson TX91
PLL will not lock for all frequencies keeps running during program search, on screen display moving / unstableChanged the tuner and the STV8224 also check transistor at location TV02 is ok
Ferguson T49F TX91
Sound at maximum and unadjustableCheck / replace surface mounted transistor TV02 BC858 on the print side of the pcb
ThomsonTX91
No sound aft droppedRA08 22k sm res dislodged;
Ferguson TX91 Thomson 10MH73B 10MG73B
dead on 12V supply (car supply)RD09, RD19 22R 0.5W fusible
Ferguson TX91 Thomson 10MH73B 10MG73B
deadSMD TF21 near LOPTx not soldered in factory
Ferguson TX91
Flashing white lines, pic interference and crackling (OK thro' SCART)TH03 BC858C band sw tr under tuner area of pcb
FergusonTX91 X51FB
St/by onlyBUH515 faulty tho measured ok - gets hot
FergusonTX91 T51N
St/by onlyRP31, 0.22R fusible resistor in 22V U1 supply open circuit.
FergusonTX91 T51N
Int lines on picTH02, TH03, TH04 BC858 SM transistors faulty. Also changed TI31 as this is another known cause, but not in this case.
FergusonTX91 T51F
Unable to access Set Up MenuTr01 BC848B sm - if Coll volts high sus Tr
FergusonTX91 T51F
Red "P" LH side screenToo many buttons pressed on R/C - put in st/by then sw off. Sw back on holding Vol+ & Vol- buttons on TV


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads