Dicas Reparação
Modelo - Chassis TCWR808M
Pesquisa: TCWR808M Enviar Dica Resolvida
Resultados 3
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | TCWR808M | INTERMITTENT/NO TAPE OPERATION | TCWR808M with TA-808M. Installed larger cap C418. Unitpowered up but decks worked erratically. Found new Reg. board in TA808M.Open F-906 causing ripple to TC to be high. With F-906 fixed, mod. was notneeded. F-906 seems too small of a value. Blows when | ||
| Sony | TCWR808M | CASSETTE DECK - NO OPERATION | Reset pin of IC-401 was never going high to 5 volts. Thisline was followed back to Q-402 and Q-401 which were measured with a DVM.Q-402 base was .1Vdc, however, Q-402 appeared to be on. Measuring thebase of Q-402 with an oscilloscope showed approximate | ||
| Sony | TCWR808M | PART NUMBER INCORRECT - PLATE (C-LEFT), SIDE REFERENCE NO.10 | Part number is incorrect. |