Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | TCS430 | NO POWER - REPLACE PAUSE SWITCH | NO TAPE MOVEMENT, TRACED TO PAUSE. | ||
Sony | TCS430 | PART NUMBER CORRECTION - IC-301 | Incorrect part number in the Service Manual. IC-301 is listedas 8-759-907-63. | ||
Sony | TCS430 | MISPRINT IN MANUAL - DC JACK | On the mounting diagram, the DC jack and headphone are listedas J301. | ||
Sony | TCS430 | CORRECT PART #, WRONG PART | Q311 shorted. Replaced it, but still no audio. I checked thepick ticket. Ticket said DTC114YK. I checked the schematic descriptionof Q311 and it was DTA114YK, I checked the part number again on schematicand FIPM and Sony semiconductor book. The book | ||
Sony | TCS430 | WON'T RECORD - ERASE HEAD OUT OF PLACE | Erase magnet out of place. This is the fourth or fifth unitI've seen like this. | ||
Sony | TCS430 | NO OUTPUT OR SOUND | No output or sound. | ||
Sony | TCS430 | HEAD WIRE TOO THICK | Shielded cable from the PC board to the tape head opens on onechannel. Wire I have will solve the problem but it is too thick and in-terferes with the mechanism and buttons of unit. Not provided with anykind of head wire to solve these problems. Is or |