Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | TCK890ES | EATS TAPE - REPLACED SPRING | Eats tapes over 90 minutes. | ||
Sony | TCK850ES | SOUND GARBLED- COULD NOT ALIGN TAPE PATH | I could not align the head properly. If the head was adjustedfor proper electrical adjustment then the tape would get eaten. If thetape path was adjusted, then the electrical adjustment would be off. | ||
Sony | TCK8 | MISSING P/N FOR LCD DISPLAY | We need the part number for the LCD display on this model.On page 43 of the service manual it lists a panel assy for the LCD (P/NX-3555-504-1) which is no longer available. Is this the LCD or is thereanother number which I am not aware of? -HQ COMMENTS | ||
Sony | TCK8B | PART NOT AVAILABLE | P/N is not in NPC system. Same part is used on TC-K7II.Need idler for repair. Is there a sub P/N? -HQ COMMENTS: Isn't the part you are looking for REEL PULLEY on P42?I could not locate the part by the number (X-2617-509-0) you specified. | ||
Sony | TCK88B | UNIT OUT OF ADJUSTMENT | Dealer complained of gross wow and flutter. Verified problem,measured 0.6% JIS weighted. | ||
Sony | TCK88B | LOOSE WIRE BETWEEN SERVO BOARD AND SYSCON BOARD | Counter was intermittently not advancing. Determined thatIC602 derives count from supply reel revolutions using output of Q536 andQ535 on servo board. | ||
Sony | TCK81 | HIGH TORQUE MEASURED | After installing new take-up arm assembly, forward torquemeasures 55 to 65 q/cn. This may be contributing to tape skew problems,by requiring increased back tension. | ||
Sony | TCK81 | BACK TENSION TORQUE ADJUSTMENT | Back tenstion and tape path was incorrect. Complaint of tapewrinkle on maxell tape. |