Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | TCFX211 | CAPSTAN RETAINING RING | |||
Sony | TCFX211 | DISTORTED AUDIO - REPLACED T/U REEL | Distorted audo sound when playback after record. Problemusually happens at the end of the tape. | ||
Sony | TCFX2 | UNIT WOULD NOT PLAY - FOUND FORWARD LEVER STICKING | The forward lever was very tight because the old grease wasdry and sticky. | ||
Sony | TCFX210 | P/N FOR HEAD WIRES | We need the part numbers for the shield wires with plugs forthe REC/PB head (CNJ301) and erase head (CN302). -HQ COMMENTS: We do not have a service part of the shield wire withconnector. We have shield wire which is 10m long.1) 4 conductor wire with br | ||
Sony | TCFX25 | IMPROPER OPERATION WITH TAPE | When using BASF Professional II, C-90 cassettes, the tapewould skew upwards just past the leader splice, ruining the tape. Thecustomer claimed all other brands worked fine, including the newlydesigned BASF Professional II. | ||
Sony | TCFX2 | STUCK LEVER | Audio line output muted in all modes. The problem wascaused by a stuck lever assy, which is used to operate the mutingmicro-switch, located on the lower right corner of the rear of the tapetransport. While attempting to disassemble, the lever suddenly | ||
Sony | TCFX22 | IDLER WHEEL BINDING | Playback was very slow. | ||
Sony | TCFX22 | BEND IN SLIDER NEEDED | Transport fails to have take-up in playback or record mode.Transport is excessively noisy and will not engage into FF smoothly.All of this can be caused by slider (355) being bent causing FF lever(305) to have incorrect timing in conjunction with take-up |