Dicas Reparação
Modelo - Chassis TAU10
Pesquisa: TAU10 Enviar Dica Resolvida
Resultados 7
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | TAU10 | NO MECHANISM MOTION | Cassette retainer clip is bent and must be replaced. No partnumber is set-up for the clip, therefore, the mechanism which has the clipattached is ordered and replaced. | ||
| Sony | TAU10 | MISSING PART NUMBER MD PCB | Need the part number for the motor drive PCB and IC-501. -HQ COMMENTS: To Tokyo: The MD board and all the components within it,including IC-501 have no part number in the service manual. Please pro-vide us with part numbers if possible. If it is not p | ||
| Sony | TAU10 | ICM TIMING FAILURE | Approximately 15 seconds into incoming message recording, theunit disconnects the line. | ||
| Sony | TAU10 | NO ANSWER TO RING SIGNAL | Unit will not answer to a ring signal. | ||
| Sony | TAU10 | OGM, REC, P.M. BUTTONS JAMMING (S-201, 2, 4) | When the OGM, REC or Private message buttons are pushed toohard, they lock into the pushed position causing various problems. Mainlya dead unit. This problem has occured in many of the units I have seen. | ||
| Sony | TAU10 | PLAYS OGM THEN IMMEDIATELY PLAYS IT AGAIN | Plays OGM then immediately plays it again. | ||
| Sony | TAU10 | RECORD BUTTON STICKS | The RECORD button will lose alignment with the record switchand it becomes stuck in the down position. There does not seem to be any-thing substantial holding the button in alignment. |