Dicas Reparação
Modelo - Chassis TADM1000ES
Pesquisa: TADM1000ES Enviar Dica Resolvida
Resultados 7
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | TADM1000ES | NO SIRCS OUTPUT VIDEO 1 OR 2-REPL IC701(875915223) | No output from video one or two. No output from IC701 pins14 and 15. All other functions are good. I have 2 units with the sameproblem serial #'s 800458 and 801408. | ||
| Sony | TADM1000ES | SOUND DISTORTED IN ROOMS - REPLACE IC611(875233678) | Distorted sound in remote rooms (CH1 only). EFM out sig. isthere. Resoldered IC's 611, 612, 609 and related circuits didn't resolveproblem. Replaced IC612 and no change. | ||
| Sony | TADM1000ES | INTERMITTENT COMMUNICATION BETWEEN M-1 AND DL-100 | Customer said there was no communication between M-1 and oneDL-100. Found communication was intermittent. | ||
| Sony | TADM1000ES | NO SIRCS OUTPUT ON VIDEO ONE - IC701 (P/N 8-759-152-23) | No SIRCS output to video one or video two but other SIRCSoutputs are fine. | ||
| Sony | TADM1000ES | CD1 SIRCS OUTPUT HAD NO CODE BEING OUTPUT | The CD1 4-pin SIRCS output jack had no signal coming out ofit. The Infrared emitter jack for CD1 also had no output. Other SIRCSoutputs were ok. | ||
| Sony | TADM1000ES | NO COMMUNICATION WITH REMOTE UNITS | Problem is communication with remote units (error light on). | ||
| Sony | TADM1000ES | UNIT GOES INTO ERROR | Unit would power up, receive switching signal and go intoerror. |