Dicas Reparação




Modelo - Chassis TAAX311


Pesquisa: TAAX311 Enviar Dica Resolvida
Resultados 8
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyTAAX311
NO DISPLAY - REPLACED REGULATOR, Q951 No display found R955 open, Q951 shorted and D957 shorted.
SonyTAAX311
NO POWER TO TUNER UNIT - LOST 12V LINE SYSTEM R958 on main board open, causing loss of 12V throughsystem tuner. Tuner unit will not display. (Connector CN1 pin 3).
SonyTAAX311
DISTORTION ON LEFT CHANNEL AFTER WARM UP - R346 MISSING After unit is on for 2 or 3 hours, the left channel distorts.There is DC offset at output of IC301 pin 1.
SonyTAAX311
NEED PART NUMBERS FOR CONNECTION CORDS BETWEEN COMPONENTS The part numbers for the connecting cords between the TA andthe ST, the TC and the CDP are not listed in the service manual.
SonyTAAX311
ADDITIONAL COMPONENTS FOUND: Q716 AND D708 ON MAIN BOARD the unit has two additional components (Q716 and D708) mountedon the Main board which are connected to pin 6 of IC701. The additionalcomponents are not referenced in the S/M. Is a S/M Supplement available?
SonyTAAX311
NOISE ON RIGHT CHANNEL Noise on right channel. Seems to be shock and temperaturesensitive.
SonyTAAX311
INCORRECT PART NUMBER, D-957 Schematic on pp. 20 - 21 shows zener diode D-957 as a UZL-27.Part list on pg. 32 calls for HZS30-1L (P/N 8-719-002-49).
SonyTAAX311
DIFFERENT PARTS IN UNIT THAN WHAT IS LISTED IN S/M The output transistors are listed in the S/M as 2SC-2921 and2SA-1215. The actual parts in the unit are 2SC-3855 and 2SA-1491. Theydo not look like they have been replaced previously. We got the P/N forthe 2SC-3855 and the 2SA-1491 from the semiconduct


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads