Dicas Reparação




Modelo - Chassis STRAV23


Pesquisa: STRAV23 Enviar Dica Resolvida
Resultados 9
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonySTRAV23
SOME FRONT PANELS BUTTONS INOP - REPL MISSING D327 Buttons for tuner and video would not work. Used remote toselect tuner found preset buttons 8, 5, 2 didn't work. Pin 63 IC301 lowin amplitude compared to pins 62 or 64, with button pushed. Found D327missing.
SonySTRAV23
NO DISPLAY - SECONDARY OF T901 OPEN Unit had no FL display, but mute, DBFB, and surround LED'swould work. Checked FL301 for proper voltages and found OV. Found T901to be open, replaced T901.
SonySTRAV23
DEFECTIVE NEW REPLACEMENT FRONT PANELS - TUNING BUTTONS The majority of the new front panels being received havedefective preset tuning buttons. The preset tuning button brackets arenot being secured properly to the front panel during manufacturing. Thefastening pegs are not being heated and pressed flat.
SonySTRAV23
NO DISPLAY - GROUND WIRE FROM FRONT PANEL SHORTED TO CHASSIS No B- supply was found on the emitter of Q702. Found theemitter of Q702 to be shorted to ground. Upon further diagnosis found theground wire on the metal front panel support, to be twisted in a way thatthe end clip was making contact with the display b
SonySTRAV23
SERVICE MANUAL ERROR - CORRECT VALUE FOR F902 IS 3.15A Service manual lists F902 as being a 5 amp fuse when it isactually a 3.15 amp fuse.
SonySTRAV23
LOW RIGHT CHANNEL - SHIELDING BETWEEN TONE CONTROLS LOOSE Shielding on the inside of the front cabinet between the bassand treble controls becomes loose. It then falls onto the tone boardshorting capacitor C551.
SonySTRAV23
REMOTE DOES NOT WORK FROM A DISTANCE GREATER THAN 10FT The remote only works up to 10 feet.
SonySTRAV23
RIGHT CHANNEL IS INTERMITTENT I have this unit and two STR-AV570X units with volume controlproblems. Kansas City has been unable to provide the control. These arenew units.
SonySTRAV230
LOW VOLUME AC HUM IN OUTPUT Low volume AC hum in output.


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads