Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | SSM721AMR | WRONG PART # FOR RV301 AND RV401, SEE BELOW | Part numbers are wrong in the service manual for: RV301: 9-996-540-01 Res. Var. Carbon 10K RV401: 9-996-538-01 Res. Var. Carbon 500ohm | ||
Sony | SSM721AMR | HIGH FREQ SEQUEL FLYBACK OSCILLATION | There was a high freq pitch oscillation and adjustingRV504 (freq. adj.) had no effect. It was running at 13.654 khz and wouldnot adjust. | ||
Sony | SSM721AMR | NO, OR INTERMITTENT VERTICAL SYNC, RESOLDERED C513 | There was either intermittent or no vertical sync. C513 wasnot soldered correctly which caused it to become loose and makeintermittent contact. | ||
Sony | SSM721AMR | NO POWER, L603 IS LOOSE | Inoperative unit or intermittant power. L603 is notcompletely soldered therefore it comes loose causing intermittant or nopower. | ||
Sony | SSM721AMR | NO VIDEO, REPLACED Q201, Q202 | No Video from the camera A and B inputs. | ||
Sony | SSM721AMR | NO SOUND, REPLACED THE SPEAKER | No sound. | ||
Sony | SSM721AMR | PART NUMBER IS INCORRECT FOR FBT,9-997-901-01 | 9-994-075-01 is listed as part number for flyback transformeron the SSM-721AM monitor. In reality, this is the part number for theflyback on the SSM620AM monitor and they are not interchangeable. Pleaseprovide the correct part number for the flyback on | ||
Sony | SSM721AMR | NO POWER, REPLACED IC-601 (A BOARD) | Monitor is inoperative. No power input to IC-601 and nooutput. |