Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | SPP72 | HANDSET HAS NO POWER - RESOLDER BATTERY CONNECTOR J502 | Hand unit either not operational or battery is discharged.Found poor solder connections on J502 battery connector on hand board.Not enough solder for a secure grip. This connector is pulled whenreplacing batteries. | ||
Sony | SPP72 | INT GRABS TEL LINE WHEN IDLE - REPLACE RL1, P/N 1-515-693-11 | Unit would intermittently grab tel line when idle. Foundrelay to be intermittent. | ||
Sony | SPP72 | NO RING/TALK - REPLACE X501, P/N 1-760-313-11 | Handset would not transmit or receive. Checked PLL IC 503 andX501, found X501 not vibrating at 10.24 MHz. | ||
Sony | SPP72 | NO AUDIO HANDSET - REPLACE SP801, P/N 1-504-563-11 | Unit had no audio handset speaker. Audio signal to speakerwas OK. OHMED SP801 found to be open. | ||
Sony | SPP72 | LOW AUDIO HANDSET SPEAKER - ADJUST VR501 | Low audio out of handset speaker. Found VR501 was notproperly adjusted. |