Dicas Reparação
Modelo - Chassis SPP110
Pesquisa: SPP110 Enviar Dica Resolvida
Resultados 21
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | SPP110 | SCANNING NOISE IN BACKGROUND | The SPP-110 is used in a house with other non-cordless phones.When the other phones are used, a scanning (swooshing) noise can be heardin the background. Is this normal? -HQ COMMENTS: Yes, it is normal. It is more likely to be picked up onother cordle | ||
| Sony | SPP110 | INCORRECT PART NUMBER FOR HANDSET ANTENNA | Service manual shows 1-503-389-11 for antenna. Actual partnumber is 1-501-389-11. -HQ COMMENTS: Thanks for the info. I will publish a service bulletin. | ||
| Sony | SPP110 | HANDSET RINGS 1/2 RING FOR NO REASON | Very intermittently handset will ring about 1/2 ring and thenstop. Unit is standing by in Norm mode when this occurs but there is noincoming call at the time. I have seen (heard) this problem on several110s, including my own bench unit. -HQ COMMENTS: | ||
| Sony | SPP110 | HANDSET NOT RECEIVING I.D. CODE | Handset not receiving I.D. code when placed on base unit.Power LED on base continues to flash, no communication between handset andbase. By hard-wiring from where I.D. transmission exits (mini-chargeterminals) to where I.D. code enters handset, proved I | ||
| Sony | SPP110 | ICS ARE HARD TO REMOVE | The IC components are glued down with a red type epoxy. Wecannot remove them easily, if at all, in order to service unit. | ||
| Sony | SPP110 | ID CODE IS NOT SENT TO HANDSET | ID code not sent to handset. Test mode showed no problems.When handset was placed on base unit, ID code would not be sent to handset. |