Dicas Reparação
Modelo - Chassis SPP11
Pesquisa: SPP11 Enviar Dica Resolvida
Resultados 44
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | SPP115 | AVAILABILITY OF WALL MOUNTING BRACKETS | There are no mounting bracket part number in the servicemanual. | ||
| Sony | SPP110 | REPLACED BASE MOTHER BOARD AND ID TRANSMISSION DID NOT WORK | Order a brand new board to replace the one that customer haddrink spilled on. First board is broken near the AC adaptor andtelephone jack due to poor wrapping. Tried a second one, could not resetID code between base and handset. Reordered the third bo | ||
| Sony | SPP110 | NO ACTIVATION DURING BATTERY SAVE | Unit works in normal mode but will not activate channelscanning in BATT SAVE mode. | ||
| Sony | SPP110 | FRONT CABINET'S CLIPS OF THE HANDSET ARE BROKEN | Unit comes to the SSC with loosened cabinet at the batterycompartment due to the broken clips. The front cabinet can be repairedinstead of replacing it. | ||
| Sony | SPP110 | PART NUMBER INCORRECT - IC208 | Above part number is incorrect. | ||
| Sony | SPP110 | UNIT DOES NOT REDIAL CORRECTLY IN BATTERY SAVE MODE | Unit will only redial 8 digits reliably when going into Talkmode from Batt Save mode. Any additional digits are either not dialed atall or dialed incorrectly. However, when going into Talk mode from Norm(standby) mode, the redial function works flawles | ||
| Sony | SPP110 | WHAT IS THE DISCONNECT TIME WHEN USING THE FLASH BUTTON | How long is the line disconnected for when using the flashbutton? -HQ COMMENTS: The line relay is opened for 500msec. | ||
| Sony | SPP110 | ID TRANSFER BETWEEN BASE AND PORTABLE CANNOT BE COMPLETED | Will not assign security code when handset is placed on base. | ||
| Sony | SPP110 | INCORRECT PART NUMBER | The service manual part list indicates IC-207 as part number,8-759-205-06 description TC74HC74F. This is incorrect, IC-207 is partnumber, 8-759-205-41 description TC74HC4066F substituted by part number,8-759-239-25 description TC74HC4066AF. Refer to se | ||
| Sony | SPP110 | IMPEDANCE OF SONY TELEPHONE PRODUCTS | What is the impedance of our phone products? -HQ COMMENTS: All Sony phones fall in the range of 50 to 300 Ohms whenthe phone is off-hook and when DC-loop current is in the range of 15 -120 ma. | ||
| Sony | SPP110 | NO CODE SENT TO HANDSET FROM BASE | Power light on Base continues to flash when Handset placed onBase. Handset is ok. Determined that code comes out of IC-501 pins 45 &46 then transmitted from Base to Handset over the air - not through topcharge terminals. When Handset placed on Base, c | ||
| Sony | SPP11 | INCORRECT SUBSTITUTE AC POWER CORD | Order above, get 155150699. Substitute is 2 conductor with noground. Original is 3 conductor. Need correct part number. -HQ COMMENTS: I checked with Product Compliance. They feel that a 3conductor cord should be used. I will check with Tokyo about | ||
| Sony | SPP110 | SCANNING NOISE IN BACKGROUND | The SPP-110 is used in a house with other non-cordless phones.When the other phones are used, a scanning (swooshing) noise can be heardin the background. Is this normal? -HQ COMMENTS: Yes, it is normal. It is more likely to be picked up onother cordle | ||
| Sony | SPP110 | INCORRECT PART NUMBER FOR HANDSET ANTENNA | Service manual shows 1-503-389-11 for antenna. Actual partnumber is 1-501-389-11. -HQ COMMENTS: Thanks for the info. I will publish a service bulletin. | ||
| Sony | SPP110 | HANDSET RINGS 1/2 RING FOR NO REASON | Very intermittently handset will ring about 1/2 ring and thenstop. Unit is standing by in Norm mode when this occurs but there is noincoming call at the time. I have seen (heard) this problem on several110s, including my own bench unit. -HQ COMMENTS: |