Dicas Reparação
Modelo - Chassis SLV640HF
Pesquisa: SLV640HF Enviar Dica Resolvida
Resultados 12
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | SLV640HF | DOES NOT REWIND OR FF | Unit did not FF or REW. It displayed error codes L22 or L24. | ||
| Sony | SLV640HF | WON'T PLAY | Unit won't play. | ||
| Sony | SLV640HF | POWER & DISPLAY WOULD CYCLE ON/OFF - REPLACED SHORTED CAPSTA | When powered up, the display would flash on and off. | ||
| Sony | SLV640HF | NO DISPLAY - REPLACED CP102 ON PS-327 BOARD | No front display. | ||
| Sony | SLV640HF | INTERMITTENT OPERATION - REPLACED X201 ON MA-214 BOARD | Int. won't work properly. | ||
| Sony | SLV640HF | NO DISPLAY - REPLACE CP102 ON PS327 BOARD WITH IMPROVED P/N | Front Panel display doesn't work -SOLUTION Replace CP102 on PS327 PC board. -HQ Comments: A service bulletin is in progress. Please replace CP102 with the improved P/N 1-467-811-12. Submitted by Walter Dixie Jet Metairie | ||
| Sony | SLV640HF | NO PIC ON CHAN OR LINE - RESOLD L601 ON MA214 BOARD | No channel picture or line input picture. Cold solder connection at L601 of Ma214, 5v dc supply for IC601 input selector. | ||
| Sony | SLV640HF | WON'T ACCEPT TAPES - LOOSE SCREW #6 HOLDING RIGHT SIDE OF FL | Won't accept tapes, when it does it just shuts off. The screw (#6) that holds the right side of cassette assy was loose. Also the FL gears were out of alignment. | ||
| Sony | SLV640HF | NO DISPLAY ALL OTHER FUNCTIONS OPERATE - REPLACE CP102 CONV | No display. Power led lights and all other functions work. | ||
| Sony | SLV640HF | NEED EXTENSION CABLES TO WORK ON HI-5 DISPLAY PCB | When you have a display problem, you cannot easily get to the back side of this pcb to measure around IC302. Could we get extensions for CN904 and 905. If not, this is how we worked on unit: Disconnected two cab | ||
| Sony | SLV640HF | SQUEEL NOISE WHEN DRUM IS ROTATING | squeel noise is produced when the drum is rotating | ||
| Sony | SLV640HF | WON'T PLAY - REPAIR THE PLAY/STOP SWICH CONTACTS | Won't play. the contacts for play and stop were bent on theknob. |