Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | SLV420 | MISSING SEGMENTS IN DISPLAY - RESOLDER CONNECTIONS OF LCD | Missing segments in the ccd display. | ||
Sony | SLV420 | PART OF DIGIT DISPLAY MISSING - CRACK @ Q3 COLLECTOR | Part of digit is missing during operation. | ||
Sony | SLV420 | POWERS ON/OFF BY ITSELF CONTINUOUSLY - REPLACE CAPSTAN MOTOR | Hit power button, unit turned on for one sec, then off for one sec and the cycle would continue | ||
Sony | SLV420 | S/B #236 FOR SLV-420/720HF DOES NOT APPEAR IN FPRIS | FPRIS S/B INDEX BY MODEL shows no service bulletins formodels SLV-420HF and SLV-720HF. Index should refer to service bulletin#236: Unit Locks-up in Eject Mode. -HQ COMMENTS: Thanks for the info, this will be added. | ||
Sony | SLV420 | WILL NOT EJECT COMPLETELY | Tape stuck it will not eject completely. When tape is in theunit in FF or REW mode, unit will eject the tape. | ||
Sony | SLV420 | NO CAPSTAN SERVO ON SLV420 | No capstan servo lock, picture has noise bars and audiodistorted. Problem found at training session in Boston, undersupervision of D. Russo. | ||
Sony | SLV420 | INTERMITTENT EJECT | Unit would not eject unless you unplugged it and replugged. | ||
Sony | SLV420 | WOW/FLUTTER IN AUIDO AND PICTURE BREAKUP | After warm up unit would have wow/flutter audio and capstanphase unlock. | ||
Sony | SLV420 | EATS TAPE | Riveting plate was not on shaft, this caused tape to bechewed. |