Dicas Reparação




Modelo - Chassis SLV353UC


Pesquisa: SLV353UC Enviar Dica Resolvida
Resultados 10
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonySLV353UC
SHUTS DOWN IN PLAY AND WON'T ACCEPT TAPE Unit would shut down, traced problem to defective cam gear.
SonySLV353UC
WON'T TURN OFF DISPLAY (NO FUNCTIONS OPERATE) When unit is plugged in (power on), immediately comes on andwon't turn off, no functions operate, won't load a tape. Looks like microis locked up. Note: When the cam motor was taken out of the unit and a DCvolt applied to it, it intermittently ran for
SonySLV353UC
NO POWER AFTER AC RE-CONNECTION If AC cord is disconnected, power will not come back on whencord is re-connected. All other operations are normal.
SonySLV353UC
NO VIDEO IN PLAYBACK MODE No video in playback only blue screen.
SonySLV353UC
HIGH PITCH SQUEAL DURING OPERATION Grounding spring assembly to center of upper drum assembly isoff center. Friction causes high pitch squeal while drum is rotating.
SonySLV353UC
VERTICAL JITTER ON SELF-RECORDED TAPES Vertical jitter when playing back self-recorded tapes. Thepre-recorded tape played back ok.
SonySLV353UC
BROKEN STABILIZER - BASE ASSEMBLY The metal portion of this assembly was found loose in 20 unitsby one dealer. The metal portion had walked up off the plastic bushingthat is press fitted into it. The plastic bushing was still held in placeby item No. 212, stopper washer.
SonySLV353UC
RKB CAM GEAR ALIGNMENT The alignment for the rotary switch in the manual isincorrect. On page 19 of the VHS Mechanical Adjustment Manual II, item3-25 states to align the square mark on the rotary switch with the arrowon the RKB Cam Gear. The correct procedure is to align the
SonySLV353UC
ICS ON THE POWER BLOCK Currently IC-201, IC-202, IC-203 and IC-204 of the powerblock are unavailable from KCP. Also, part numbers have not beenassigned to them. -HQ COMMENTS: The part numbers of the ICs are:IC201 - 180879611IC202 - 180879511IC203 - 180802211IC204 - 874992043
SonySLV353UC
HEAD GAP SIZE What is the head gap size of the SLV-353?


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads