Dicas Reparação
Modelo - Chassis SLHF900
Pesquisa: SLHF900 Enviar Dica Resolvida
Resultados 57
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | SLHF900 | CONNECTING REMOTE COMMANDER TO AUDIO REM COMMANDERS | Can RMT-125 be connected to audio remote commanders forSTR-VX750 (RMS-750) and STR-AV760 (RMS-760)? SL-HF900 has no info inS/M or operating instructions. | ||
| Sony | SLHF900 | COLOR BEAT IN PICTURE | When inserting video over self-recorded tape, insert is quiteclean. When inserting (on HF900) over tape recorded on an SL-2000, chromabeat and flickers become evident. Could head width difference be problem? | ||
| Sony | SLHF900 | RAINBOW IN EDITS | Rainbow or beat noise in video when in video insert functiononly. Upon inspection found erase head not being turned on in thisfunction. -HQ COMMENTS: This is normal in the SL-HF900. A strong and constantsignal such as color bars from a signal generato | ||
| Sony | SLHF900 | NEED P/N FOR PLASTIC BRACKET | Need part # for plastic bracket. -HQ COMMENTS: Unfortunately, this part is not available for replacement.It may be possible to get a spare part from a scrap unit from theRefurbishing Center in Compton. | ||
| Sony | SLHF900 | PINCH SOLENOID WON | Pinch solenoid will not hold after actuation. Found 2SD1164installed as per schematic and parts list. However, we found that only2SD773 would work in its place. I believe that 2SD1164 is wrong for thistransistor (Q416), judging by Q414 and Q418. -HQ | ||
| Sony | SLHF900 | HUM IN AUDIO WHEN CONNECTED TO CABLE AND STEREO | When connected to stereo system and cable, SL-HF900 wouldoutput hum from audio jacks. This would disappear if the RF cable wasdisconnected. | ||
| Sony | SLHF900 | NO DISPLAY | No display at all. Pin 1 of ND101 not soldered at all. | ||
| Sony | SLHF900 | AUDIO MUTED | Audio was muted for all functions. | ||
| Sony | SLHF900 | SPECIAL EFFECTS NOISY | Noisy Betascan, no slow motion or other special effects.Looked at RF output on scope, no output from A | ||
| Sony | SLHF900 | REWIND PROBLEM | Unit rewinds for approx. 3 to 6 sec then stops (same problemon reverse Betascan). Problem happened as soon as unit was unpacked. | ||
| Sony | SLHF900 | NO REWIND | Unit would go into all forward modes. In rewind or review,the unit would start and go into the stop mode after 3 to 4 seconds.Sensor is located on RD-12 board. The board calls out for Q001/Q002, butthe schematic shows them as diodes D001/D002. Either | ||
| Sony | SLHF900 | INTERMITTENT AUDIO POP | Dealer has reported that four units in stock have the follow-ing problems: During PAUSE/EDIT, unit give an audio pop intermittently. -HQ COMMENTS: If a pop noise is heard in Hi-Fi playback, add a 4.7uFelectrolytic capacitor across R510 on the AF-9 boar |