Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | SLHF900 | DEAD | No power, unit dead. | ||
Sony | SLHF900 | UNIT WOULD GO INTO RECORD PAUSE WHEN REC BUTTON ACTUATED | Unit would enter RECORD PAUSE immediately upon actuation ofthe RECORD button. This is not normal operation for this unit. A properlyoperating one goes directly into RECORD mode, without PAUSE. We had twounits with the same complaint in the shop simultane | ||
Sony | SLHF900 | CORRECTION OF REF # 404, 408, 410, 412 | Part Ref #'s switched. Some parts ref #'s are wrong, see list: Incorrect CorrectItem 408 2-387-132-01 2-387-135-11Item 410 2-397-135-11 2-387-132-01Item 404 2- | ||
Sony | SLHF900 | NO DRUM AND CAPSTAN ROTATION | Machine will load tape and thread. Hit Play and drum won'trun. Capstan won't run. Reel motor running. | ||
Sony | SLHF900 | SUB CHASSIS ASSEMBLY PART NUMBER | Service bulletin indicates new part number is a X-3691-643-3.This new part has two additional posts on it which will not allow it to beused. Our technician in San Bruno said he removed both of these at onetime when he repaired this unit. Servicer claim | ||
Sony | SLHF900 | NEW SUB CHASSIS WILL NOT WORK WITH SOFT BRAKES/TENSION ARM | The sub chassis has been changed. Two extra mold portions(highlighted in yellow on the enclosed sample) have been added. Theseprevent operation of the soft brakes (Ref. No. 313 and 315) and the ten-sion regulator (Ref. No. 306). Is there a reason for | ||
Sony | SLHF900 | INTERMITTENT CHROMA LOCK FLOATING VERTICAL COLOR BARS | In playback unit manifested vertical colored bars in picture.The actual video in the background was uncolored. Traced problem to anunlocked VCO on the VI-10 board. Tried adjusting RV-403, but noticed itwas erratic and the setting would drift with time | ||
Sony | SLHF900 | NO PART NUMBER PART OF UD ASSEMBLY | What is part number of the item that number 328 fits into?See page 185 of the service manual. -HQ COMMENTS: The part number for the UD ARM is: 3-691-650-01. | ||
Sony | SLHF900 | CAN PLAY PRE-RECORDED TAPES BUT NOT TAPES RECORDED ON ITSELF | Unit would play pre-recorded tapes but not tapes recorded onitself. | ||
Sony | SLHF900 | CUE/REVIEW | When coming out of Cue/Review, capstan would not slow down.Tape would wrap itself around the capstan shaft. | ||
Sony | SLHF900 | NEW SUBCHASSIS DOES NOT FIT | The new sub-chassis from stock does not fit. The holes on therotor and stator assembly do not link up. -HQ COMMENTS: Please refer to service bulletin VCR390R. | ||
Sony | SLHF900 | ASSEMBLE EDITING IS NOT ACCURATE | When assemble editing is used, the SL-HF900 could be off by asmuch as five frames. -HQ COMMENTS: This is normal. The editing is not frame accurate. | ||
Sony | SLHF900 | UNIT DOES NOT ACCEPT THE CASSETTE | As the cassette is placed into the cassette compartment, theloading ring assembly goes into the loaded/threaded position. The cass-ette compartment jams and does not accept the cassette. | ||
Sony | SLHF900 | NO AUDIO E-E | No audio E-E, playback low audio and distorted. No -70VDC atpin 7 IC606 AF-9 board. C008 HP-12 board short. | ||
Sony | SLHF900 | BAD WOW AND FLUTTER | Unit had 1.7 of W and F. Checked over all of unit. Found 12Vline was up to 17.8V. (Found by H. Horimoto). |