Dicas Reparação




Modelo - Chassis SLHF360


Pesquisa: SLHF360 Enviar Dica Resolvida
Resultados 5
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonySLHF360
LOADING MTR DOES NOT FIT: FILE OFF SMALL NIPPLE ON BRACKET The servicer received a replacement loading motor which doesnot fit. Reference number 107 bracket motor has a tab/post which fits ina hole on the original motor. The replacement motor does not have thehole, thus the motor does not mount flush with the
SonySLHF360
UNIT DOES NOT RESPOND TO SOME CONTROL BUTTON OPERATION Unit would not respond to some control button operation. Thisis a customer complaint won't record, can't set clock, up and down arrowsdon't work.
SonySLHF360
WILL NOT LOAD/EJECT I have found two units with the same problem. One of the twoleads soldered to the terminals of the loading motor breaks off due to themovement and play of the motor.
SonySLHF360
TAPE THREADS HALF WAY THEN EJECTS - REEL TABLE WILL NOT TURN Tape threads half way then ejects. Reel table will not turn.
SonySLHF360
UNIT DEAD, CANNOT TURN OFF POWER LIGHT Recording switch was stuck by broken front panel.


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads