Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | SL300 | NO CHANNEL MEMORY | Tuner loses channel memory. Will not stop on channel whenadjusting. Non-volatile memory, IC804 does not correct problem. | ||
Sony | SL300 | DIFFERENT TYPES OF IC-802 | There are two types of IC used for IC-802. The part listedin the service manual is a S-8053ALR, but some units have a PST529Dinstalled. These two do not have the same pin-out arrangement. | ||
Sony | SL300 | EATS TAPE | Unit would thread as soon as power plugged in. Then wouldnot eject, but was trying to eject. If unloaded manually, then unitwould load tape normally but again would not eject. | ||
Sony | SL300 | NO CHANNEL (+, -) RECORD, TIMER RECORD OPERATION | Key inputs for chan (+, -): Rec, timer + Rec, would not oper-ate. Found voltage on key input ports of IC801 higher than B+ to upc.Found voltage drop across D804 only .2 volts. | ||
Sony | SL300 | PICTURE DISTORTION | Strange distortion in picture. Check RF waveform you can seeone head missing. | ||
Sony | SL300 | WILL NOT THREAD TAPE ALL THE WAY | The unit would load the cassette and thread about 1 inch andthen eject the tape. We found that the capstan motor was not turning andwas the cause of the problem. Replacement resolved the problem. | ||
Sony | SL300 | WILL NOT LOAD | Will not load tape. | ||
Sony | SL300 | BROKEN S GEAR | Unit came in with broken gear. Installed replacement, whichalso broke. -HQ COMMENTS: I am sending you a new S gear kit. This parts kit will bestocked in the future. | ||
Sony | SL3000 | MISSING PART NUMBER FOR FRAME BUTTON | Need part number for frame button on Page 8-2 of SL-3000manual. -HQ COMMENTS: P/N is 3-654-555-00 (Qty in stock - 100). |